Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, a Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects, a Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps, and a Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
1x Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects (46CK4)
KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
4AWG 2-Channel Amp Kit
This Complete Four Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. The best hardware, signal and power cable comes in one convenient package.
1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps (46CXARCt)
Kicker 46CXARC Remote / Bass Knob
CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
CXARC Remote
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.
1x Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output (46KISLOC2)
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.
Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.
Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.
• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed!
• LED indicator for DC offset turn-on
*Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.