Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and 2x Kicker 50CWCD124 CompC 12" Subwoofer, Dual 4-Ohm.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
2x Kicker 50CWCD124 CompC 12" Subwoofer, Dual 4-Ohm (50CWCD124)
12" CompC 4 Ohm DVC
Signature Stitches - Kicker's signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection - CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool - Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
Your setup. Your way. - Single and dual-voice-coil four-ohm options let you get the most out of your amp.
Make It Bump - This KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
Forced Air Cooling -
As the woofer's cone moves downward, hot air around the voice coil is forced out of the woofer. As the woofer's cone moves upward, cool outside air is drawn into the woofer cooling the voice coil.
The Dual-voice-coil CompC Subwoofers make wiring easy with spring-loaded terminals, for easy optimizing of a CX-Series Amplifier. Big power and big bass are easy to get.
Features:
• Dual Four-Ohm Voice Coil and Reengineered for Increased Excursion and Deeper Bass
• Injection-Molded Polypropylene Cone
• Forced-Air Cooling for Outstanding Durability
• Ribbed Polyurethane Surround
• Signature Yellow Surround Stitching
• High-Strength Spiralead Tinsel Leads
• Stamped Steel Basket
• High Temp Voice Coil
• Spring-Loaded Speaker Terminals
Specifications:
• Size [in, cm] - 12, 30
• Recommended Amplifier Power [watts RMS] - 150-300
• Peak Power Handling - 600 Watts
• Sensitivity [dB 1w/1m] - 87.1
• Rated Impedance [OHMS] - 4 DVC
• Fs [Hz] - 30.6
• Frequency Response [Hz] - 27-500
• Outer Frame Dimension [in, cm] - 12-5/8, 32
• Mounting Depth [in, cm] - 5-3/4, 14.6
• Mounting Cutout [in, cm] - 11, 27.9
• Rec Sealed Box Vol [cu. ft, liters] - 1.25 to 3.5, 35.4 to 99.1
• Rec Vented Box Vol [cu. ft, liters] - 2.25, 63.7