Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and 2x Kicker 52CVR102 - CVR10 CompVR 10-Inch (25cm) Subwoofer, DVC, 2-ohm.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
2x Kicker 52CVR102 - CVR10 CompVR 10-Inch (25cm) Subwoofer, DVC, 2-ohm (52CVR102)
The reengineered CompVR 10-Inch Subwoofer is a 2Ω dual voice coil design, built to get the most out of your amp. The dual voice coil design adds a new level of wiring flexibility, to get the most out of CX Series amplifier, no matter how many subs you add to your ride. The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 2 DVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 83.6
MOUNTING DEPTH [in, cm]: 5-1/2, 14
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6