Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and 2x Kicker 52CVR122 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 2-ohm.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
2x Kicker 52CVR122 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 2-ohm (52CVR122)
12" CompVR 2 Ohm
The reengineered CompVR 12-Inch Subwoofer is a 2Ω dual voice coil design, built for easy wiring.
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake.
The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 2 DVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 86.9
MOUNTING DEPTH [in, cm]: 6-3/8, 16.2
MOUNTING DIAMETER [in, cm]: 11, 27.9
MIN SEALED BOX VOL [cu. ft, L]: 1, 28.3
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7