Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and a Kicker 50DCWC122 Dual CompC 12-inch Subwoofers in Vented Enclosure, 2-Ohm.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
1x Kicker 50DCWC122 Dual CompC 12-inch Subwoofers in Vented Enclosure, 2-Ohm (50DCWC122)
Dual 12" CompC Loaded Subwoofer Enclosure
Signature Stitches - Kicker's signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection - CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool - Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
Your setup. Your way. - Single and dual-voice-coil four-ohm options let you get the most out of your amp.
Make It Bump - This KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
Forced Air Cooling -
As the woofer's cone moves downward, hot air around the voice coil is forced out of the woofer. As the woofer's cone moves upward, cool outside air is drawn into the woofer cooling the voice coil.
The CompC Dual 12-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.
Features:
• Fits Perfectly In A Trunk or SUV
• Genuine CompC Subwoofer
• Custom Port Design
• Made Of Heavy MDF
• Spring Loaded Speaker Terminal
• Thick Black Carpet Protects the Enclosure
• Embroidered KICKER Logo
• Works Perfectly with CXA800.1 (Sold separately)
Specifications:
• Dual Subwoofers (in, cm) - (2) 12, 30
• Impedance (Ohms) - 2
• Recommended Amplifier Power (watts RMS) - 600
• Peak Power (watts, per ANSI/CTA-2031-A) - 1200
• Sensitivity (dB 1w/1m) - 99.9
• Tuning Frequency [Hz] - 31
• Box Top Depth (in, cm) - 14, 35.6
• Box Bottom Depth (in, cm) - 17-1/4, 43.8
• Box Height (in, cm) - 16, 40.6
• Box Width (in, cm) - 31-7/8, 81.0