Description
The KS 600.2 V3 is a truly SQ packed powerhouse that offers users a powerful moderately sized amplifier that can deliver up to 1200 watts of power for subwoofer applications and/or those full range marine tower applications and up to 600 watts of power per channel for your dynamic powerhouse components systems.
Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. That's where the KS amp's Class G/H design comes into play. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge.
Features:
4-Channel Full Range Amplifier
Advanced Microprocessor Control System
Non-Digital Class G/H Switching Design
Code Based Flashing Diagnostics
Designed By Robert Zeff
Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload
Can Drive Highly Reactive Loads
Optically Isolated Mosfet Power Supply
Quiet Internal Fan Cooling
Specifications:
2-Channels @ 4 Ohms 400 Watts
2-Channels @ 2 Ohms 600 Watts
1-Channel @ 4 Ohms (Bridged) 1200 Watts
Frequency Response 5Hz - 50kHz
Crossover Range 55Hz - 5500Hz
Bass Boost 15dB @ 45Hz
S/N Ratio CEA2006 @ 1W 95.1dB
S/N Ratio @ Full Power 112.0dB
Input Sensitivity (Low) 200mV - 3.5V
Max Current Draw 120A @ 1200 Watts 1% THD
Idle Current 1.14 Amp
Fuse 4 x 30 Amp
Dimensions 15.5(L) x 8.0"(W)x2.375"(H)
Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design. But why does this class of amplifier perform so well? It's built for music, not test tones or noise. When an amplifier is playing music, even at full volume, due to its dynamic nature, it is only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest of the time your 700-watt amp is making less than 350 watts. That's where the KS amp's Class G/H design comes into play. Then, in a fraction of a second, your amp becomes an 800-watt monster that is ready for any musical challenge.
Features:
4-Channel Full Range Amplifier
Advanced Microprocessor Control System
Non-Digital Class G/H Switching Design
Code Based Flashing Diagnostics
Designed By Robert Zeff
Protection Against: Reverse Voltage, Over Voltage, Speaker Short, and Thermal Overload
Can Drive Highly Reactive Loads
Optically Isolated Mosfet Power Supply
Quiet Internal Fan Cooling
Specifications:
2-Channels @ 4 Ohms 400 Watts
2-Channels @ 2 Ohms 600 Watts
1-Channel @ 4 Ohms (Bridged) 1200 Watts
Frequency Response 5Hz - 50kHz
Crossover Range 55Hz - 5500Hz
Bass Boost 15dB @ 45Hz
S/N Ratio CEA2006 @ 1W 95.1dB
S/N Ratio @ Full Power 112.0dB
Input Sensitivity (Low) 200mV - 3.5V
Max Current Draw 120A @ 1200 Watts 1% THD
Idle Current 1.14 Amp
Fuse 4 x 30 Amp
Dimensions 15.5(L) x 8.0"(W)x2.375"(H)
