Description
M200 marine audio
JL Audio M200-10IB-S-Gw-i-4 10" RGB Marine Subwoofer, White
Add deep bass and RGB lighting to your boat with this 10-inch JL Audio M200 subwoofer and White Sport grille. Its 250W RMS, long-excursion design uses a polypropylene cone, rubber surround and synthetic spider for controlled bass. Infinite-baffle operation avoids a dedicated enclosure when adequate rear airspace is available.
250W RMS4 ohmsRGB lightingWhite Sport grille
Controlled bass
A polypropylene cone, rubber surround and marine-grade synthetic spider support the long-excursion driver.
Customizable lighting
Use the optional Garmin Spectra module for advanced RGB control through a compatible chartplotter or the ActiveCaptain app. Controller sold separately.
Marine construction
Marine-grade materials and corrosion-resistant connections withstand salt and sun. IPX6 protection applies to the front when properly mounted.
Infinite-baffle installation
Designed to work with 2.00 cu ft of air behind the driver without a dedicated enclosure. Keep this space clear. If a sealed enclosure is used, the recommended net internal volume is 2.00 cu ft. Ported enclosures are not recommended.
Technical specifications
| Model | M200-10IB-S-Gw-i-4 |
| Garmin part number | 010-04759-00 |
| Size | 10 inches |
| Grille | White Sport |
| Power handling | 250W RMS |
| Impedance | 4 ohms |
| Sensitivity | 86 dB at 1W/1m |
| Recommended amplifier power | 250W RMS |
| Mounting hole | 8.76 inches (222.5 mm) |
| Mounting depth | 5.16 inches |
| Outside diameter | 10.84 inches |
| Grille protrusion | 1.85 inches |
| Weight | 10.69 lb |
| LED supply | 10–14.4 VDC; 220 mA maximum at 14.4 VDC |
| Warranty | 3 years |
| Cone | Injection-molded polypropylene |
| Speaker connection | Spade connectors |
| LED connection | 4-conductor 20 AWG lead with waterproof connector |
| Compass-safe distance | 116 inches (295 cm) |
Included items
- One subwoofer with White Sport grille
- 0.25-inch and 0.185-inch female crimpable connectors
- Water-resistant 4-pin connector, mounting screws and documentation
Installation notes
Protect the rear, wiring and connections from moisture. Mount vertically when exposed to weather and above the waterline. Use the supplied LED harness and a 500 mA fast-blow fuse in a marine fuse holder at the power-source end. Follow the installation manual.
Protect the rear, wiring and connections from moisture. Mount vertically when exposed to weather and above the waterline. Use the supplied LED harness and a 500 mA fast-blow fuse in a marine fuse holder at the power-source end. Follow the installation manual.