Description
Included in this kit
This bundle includes a Memphis Audio MJ1512 MOJO 15" 2000W RMS Subwoofer with Selectable 1Ω or 2Ω Impedance, a Memphis Audio MJP2000.1 Monoblock Subwoofer Amplifier - 2000 Watts RMS x 1 at 1-Ohm, and a Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
1x Memphis Audio MJ1512 MOJO 15" 2000W RMS Subwoofer with Selectable 1Ω or 2Ω Impedance (MJ1512)
Memphis Audio MOJO1512 – 15″ High-Excursion Subwoofer (Selectable 1Ω / 2Ω, 2000W RMS)
The new MOJO subwoofer is everything fans have been begging for—violent, hard-hitting bass wrapped in the unapologetic, old-school attitude that made MOJO legendary. Re-engineered from the ground up, the MOJO1512 blends modern high-output engineering with bold visual cues pulled straight from MOJO’s roots.
Overview
MOJO Bass, Turned All the Way Up
The MOJO1512 delivers the aggressive, chest-slamming bass MOJO is known for, now with modern materials and increased excursion capability. A massive high-roll surround and reinforced suspension allow the cone to move violently while staying controlled, even at extreme output levels.
Visually, the bold orange cast aluminum basket pays tribute to the original MOJO designs, while the high-gloss carbon fiber dust cap adds rigidity and a refined, high-performance finish.
Key Features
Designed for Extreme Output
- Beefy high-roll surround delivers 1″ XMAX and up to 1.75″ of mechanical excursion.
- High-gloss carbon fiber dust cap provides rigidity under extreme pressure.
- Orange cast aluminum basket combines classic MOJO styling with modern strength.
- Patented FLEX Technology allows fast selection between 1Ω and 2Ω impedance.
- Reinforced spider suspension maintains cone control and long-term durability.
Motor Structure
300 oz Magnet & 4″ Triple Voice Coil
A massive 300 oz magnet motor supports the MOJO1512’s 2000W RMS power rating, while the 4-inch aluminum triple voice coil uses high-temperature windings to deliver clean, stable power handling during high-demand playback.
Cooling & Reliability
DVVC & Vented Basket Design
The vented cast aluminum basket works in tandem with DVVC (Direct Vent Voice Coil Cooling) to actively pull heat away from the motor structure. This helps maintain consistent performance and reduces the risk of thermal compression during extended high-output sessions.
| Model | Memphis Audio MOJO1512 |
| Subwoofer Size | 15″ |
| Rated Impedance | Selectable 1Ω or 2Ω (FLEX Technology) |
| Power Handling (RMS / Peak) | 2000W / 4000W |
| Sensitivity | 86 dB @ 1Ω / 86 dB @ 2Ω |
| Voice Coil Diameter | 4″ aluminum (triple voice coil) |
| Magnet Size | 300 oz |
| Mounting Depth | 9.06″ |
| Cutout Diameter | 13.81″ |
| Cooling | DVVC direct vent voice coil cooling |
| Basket | Vented cast aluminum basket |
1x Memphis Audio MJP2000.1 Monoblock Subwoofer Amplifier - 2000 Watts RMS x 1 at 1-Ohm (MJP2000.1)
Memphis Audio MOJO Pro Mono Amplifier
The Memphis Audio MOJO Pro amplifier is engineered for high-output pro audio and performance-focused car audio systems, delivering extreme power, clean response, and flexible system configuration in a rugged, compact chassis.
Overview
High-Power MOJO Pro Performance
Built to carry the MOJO name, this mono amplifier delivers massive output with precise control. Its compact footprint and high efficiency make it suitable for both pro audio builds and high-performance daily-driven systems.
With stable operation down to 1 ohm and strapable capability, the MOJO Pro provides system designers and installers the flexibility to scale power as system demands increase.
Key Features
Designed for Output, Control & Reliability
- Extruded aluminum heatsink with exposed metal accents for thermal stability.
- 12dB/octave Butterworth crossovers for controlled low-frequency performance.
- Variable crossover and EQ controls for precise system tuning.
- Variable EQ bass boost on mono block models.
- Strapable mono block design for expanded power capability.
- Remote bass knob included for on-the-fly output adjustment.
Power Output
Stable High-Power Mono Operation
- 830 watts RMS x 1 @ 4Ω.
- 1500 watts RMS x 1 @ 2Ω.
- 2000 watts RMS x 1 @ 1Ω.
- Designed for high-current, high-output applications.
Signal Performance
Clean, Controlled Low-End Response
- Frequency response from 11Hz to 200Hz.
- Total Harmonic Distortion under 1% at 4Ω.
- Wide 400mV–7.5V input sensitivity range.
- Engineered for consistent output under demanding loads.
| Amplifier Type | Mono block |
| RMS Power @ 4Ω | 830W x 1 |
| RMS Power @ 2Ω | 1500W x 1 |
| RMS Power @ 1Ω | 2000W x 1 |
| THD @ 4Ω | <1% |
| Frequency Response | 11Hz – 200Hz |
| Input Sensitivity | 400mV – 7.5V |
| Crossover Type | 12dB/octave Butterworth |
| Dimensions (L × W × H) | 7.5" × 13.2" × 2" |
| Recommended Amp Kit | 0GKIT |
The MOJO Pro mono amplifier is designed for extreme output systems requiring clean, controlled bass and scalable power. Proper electrical support and professional installation are recommended for best performance.
1x Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs (0GKIT)
0GKIT – 0 Gauge Amplifier Installation Kit
True AWG OFC Wiring • Complete High-Performance Amp Install Solution
Memphis 0GKITS are engineered for serious power delivery using true standard AWG wire made from 100% pure oxygen-free copper. Amplifier performance is directly affected by the quality of wiring and connections, and this kit delivers the clean, reliable power that professional installers across the nation trust. The 0GKIT includes everything required for a high-current amplifier installation—including interconnects— making it one of the highest-quality 0 gauge amp kits on the market.
Overview
True 0 Gauge Power for Maximum Amplifier Performance
Designed to support high-current amplifiers, the Memphis 0GKIT uses true AWG oxygen-free copper wiring to ensure maximum conductivity and minimal voltage drop. This kit eliminates the compromises found in low-quality wiring solutions and provides everything needed for a clean, professional-grade amplifier installation.
- True standard AWG wire made from 100% OFC.
- Supports high-power amplifier systems.
- Includes interconnects and distribution hardware.
Built with the materials and components professionals rely on for clean, powerful performance.
Construction
Premium Materials & Hardware
The 0GKIT includes satin chrome plated brass components, nickel-plated terminals, and durable frosted jacket wiring for long-lasting performance and corrosion resistance.
- Satin chrome plated brass fuse blocks and terminals.
- Nickel-plated ring terminals and ground lug.
- Durable frosted wire jackets for easy routing.
Kit Features
Complete High-Current Installation Solution
What’s Included
In the Box
- 25’ 1/0 AWG frosted orange power wire
- 2’ 1/0 AWG frosted black ground wire
- 8’ 4 AWG frosted orange power wire
- 4’ 4 AWG frosted black ground wire
- 20’ 18 AWG blue remote turn-on wire
- 17’ 2-channel parallel interconnect
- 17’ 4-channel parallel interconnect
- ANL fuse block (satin chrome plated brass)
- 250A ANL fuse (nickel plated)
- Battery terminal (satin chrome plated brass)
- (2) Power distribution blocks (satin chrome plated brass)
- Nickel plated ground lug
- (3) 1/0 AWG nickel plated ring terminals
- (1) 1/0 AWG snap bushing
- (8) 8" black cable ties
- (4) ST3.9 × 16mm black set screws
- Complete hardware pack
| Model | 0GKIT |
| Power Wire Gauge | 0 AWG |
| Wire Material | 100% Oxygen-Free Copper (OFC) |
| Fuse Type | ANL |
| Interconnects | (3) ETP-17 parallel interconnects |