Description
Included in this kit
This bundle includes a Memphis Audio MJ1212 Mojo 12" 1500 Watt 1 Or 2 Ohm Selectable Sub, a Memphis Audio MJP1500.1 Monoblock Subwoofer Amplifier - 1500 Watts RMS x 1 at 1-Ohm, and a Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
1x Memphis Audio MJ1212 Mojo 12" 1500 Watt 1 Or 2 Ohm Selectable Sub (MJ1212)
Memphis Audio MOJO1212 — 12" Subwoofer (Selectable 1Ω / 2Ω, 1500W RMS)
The MOJO subwoofer is re-engineered for aggressive, high-excursion bass with the unapologetic styling the MOJO name is known for. From the bold orange cast basket to the high-roll surround and carbon fiber cone, MOJO1212 is built to take serious power while staying controlled—and adds selectable impedance flexibility via Memphis’ patented FLEX technology.
Overview
Old-School MOJO Attitude, Modern Motor & Excursion
Built for violent, hard-hitting bass, the MOJO1212 pairs a massive high-roll surround and reinforced spider system with a high-gloss carbon fiber cone and a heavy motor structure. The result is extreme cone travel, clean output under pressure, and the durability needed for extended high-power play.
Memphis’ patented FLEX technology adds system versatility by letting you select 1Ω or 2Ω impedance using the included jumper plug—no tools required—so you can configure your load to match your amplifier goals.
Feature Highlights
Built for High Power, High Excursion, and Thermal Control
Construction
Cone Control and Suspension Strength
MOJO1212 is built around a reinforced spider suspension for durability and precise cone control at high excursion. The high-roll surround supports extreme movement while maintaining stability when you’re pushing power.
- Reinforced spider suspension for long-lasting durability and controlled movement.
- High-roll surround designed for extreme cone travel (1" XMAX; 1.75" mechanical excursion).
- High-gloss carbon fiber dust cap engineered for rigidity under pressure.
Cooling & Reliability
Vented Cast Basket + DVVC Coil Cooling
To help maintain performance during extended sessions, the cast aluminum basket is vented, and DVVC (Direct Vent Voice Coil Cooling) actively pulls heat away from the coil to reduce thermal shutdown and distortion.
- Vented cast aluminum basket to promote cooling and consistency.
- DVVC cooling designed to pull heat away from the voice coil.
- 4" aluminum triple voice coil with high-temp aluminum windings.
Integration
Selectable Impedance for Flexible System Design
Patented FLEX technology allows selectable 1Ω or 2Ω impedance using the included jumper plug, making it easier to configure your system around amplifier capability and wiring goals without swapping drivers.
Mounting depth is 8.5" with an 11" cutout diameter. Confirm enclosure clearance before installation.
| Model | MOJO1212 |
| Size | 12" |
| Selectable Voice Coil | 1Ω or 2Ω (FLEX technology; jumper plug included) |
| Power Handling (RMS / Peak) | 1500W / 3000W |
| Sensitivity | 83.5 dB @ 1Ω / 83.7 dB @ 2Ω |
| Magnet Size | 300 oz |
| Voice Coil | 4" (aluminum triple voice coil) |
| Mounting Depth | 8.5" |
| Cutout Diameter | 11" |
1x Memphis Audio MJP1500.1 Monoblock Subwoofer Amplifier - 1500 Watts RMS x 1 at 1-Ohm (MJP1500.1)
MJP1500.1 – MOJO Pro Monoblock Amplifier
1500W RMS @ 1Ω • Strap-Able High-Output Mono Amplifier
MOJO Pro amplifiers are built for extreme output and aggressive system designs. The MJP1500.1 monoblock amplifier features a rugged extruded aluminum chassis with exposed aluminum accents and a signature orange MOJO accent strip. Designed for pro-audio style systems, this strap-able mono amplifier delivers massive power with the tuning flexibility required to push subwoofer systems to their limits.
Overview
MOJO Pro Power with System-Building Flexibility
The MJP1500.1 is designed to deliver serious low-frequency output for high-power subwoofer systems. With up to 1500 watts RMS at 1 ohm and a strap-able mono configuration, this amplifier allows multiple units to be combined for even greater output potential. Variable crossover and EQ controls make it easy to dial in clean, hard-hitting bass.
- High-output monoblock design optimized for subwoofer systems.
- Strap-able architecture for extreme multi-amp builds.
- Installer-friendly tuning controls.
Built for aggressive systems that demand power, control, and durability.
Design
Rugged Extruded Aluminum Chassis
The extruded aluminum heat sink is designed to dissipate heat efficiently while maintaining a bold, industrial look. Exposed aluminum accents and the signature orange MOJO strip make the MJP1500.1 a standout centerpiece in any build.
- Extruded aluminum heat sink.
- Exposed aluminum accents.
- MOJO orange accent strip.
Features
Control & Output Tuning
| Amplifier Type | Monoblock |
| RMS Power @ 4Ω | 675 W x 1 |
| RMS Power @ 2Ω | 1050 W x 1 |
| RMS Power @ 1Ω | 1500 W x 1 |
| THD @ 4Ω | < 1% |
| Frequency Response | 11 Hz – 200 Hz |
| Input Range | 200 mV – 6 V (Low) / 3 V – 20 V (High) |
| Dimensions (L × W × H) | 7.5 × 11 × 2 in |
| Recommended Amp Kit | 0GKIT |
1x Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs (0GKIT)
0GKIT – 0 Gauge Amplifier Installation Kit
True AWG OFC Wiring • Complete High-Performance Amp Install Solution
Memphis 0GKITS are engineered for serious power delivery using true standard AWG wire made from 100% pure oxygen-free copper. Amplifier performance is directly affected by the quality of wiring and connections, and this kit delivers the clean, reliable power that professional installers across the nation trust. The 0GKIT includes everything required for a high-current amplifier installation—including interconnects— making it one of the highest-quality 0 gauge amp kits on the market.
Overview
True 0 Gauge Power for Maximum Amplifier Performance
Designed to support high-current amplifiers, the Memphis 0GKIT uses true AWG oxygen-free copper wiring to ensure maximum conductivity and minimal voltage drop. This kit eliminates the compromises found in low-quality wiring solutions and provides everything needed for a clean, professional-grade amplifier installation.
- True standard AWG wire made from 100% OFC.
- Supports high-power amplifier systems.
- Includes interconnects and distribution hardware.
Built with the materials and components professionals rely on for clean, powerful performance.
Construction
Premium Materials & Hardware
The 0GKIT includes satin chrome plated brass components, nickel-plated terminals, and durable frosted jacket wiring for long-lasting performance and corrosion resistance.
- Satin chrome plated brass fuse blocks and terminals.
- Nickel-plated ring terminals and ground lug.
- Durable frosted wire jackets for easy routing.
Kit Features
Complete High-Current Installation Solution
What’s Included
In the Box
- 25’ 1/0 AWG frosted orange power wire
- 2’ 1/0 AWG frosted black ground wire
- 8’ 4 AWG frosted orange power wire
- 4’ 4 AWG frosted black ground wire
- 20’ 18 AWG blue remote turn-on wire
- 17’ 2-channel parallel interconnect
- 17’ 4-channel parallel interconnect
- ANL fuse block (satin chrome plated brass)
- 250A ANL fuse (nickel plated)
- Battery terminal (satin chrome plated brass)
- (2) Power distribution blocks (satin chrome plated brass)
- Nickel plated ground lug
- (3) 1/0 AWG nickel plated ring terminals
- (1) 1/0 AWG snap bushing
- (8) 8" black cable ties
- (4) ST3.9 × 16mm black set screws
- Complete hardware pack
| Model | 0GKIT |
| Power Wire Gauge | 0 AWG |
| Wire Material | 100% Oxygen-Free Copper (OFC) |
| Fuse Type | ANL |
| Interconnects | (3) ETP-17 parallel interconnects |