Description
Included in this kit
This bundle includes a Memphis Audio MJMERAM8D1V3 Dual 8" Ram enclosure 1 Ohm, a Memphis Audio MJP1500.1 Monoblock Subwoofer Amplifier - 1500 Watts RMS x 1 at 1-Ohm, and a Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
1x Memphis Audio MJMERAM8D1V3 Dual 8" Ram enclosure 1 Ohm (MJMERAM8D1V3)
Memphis Audio MJMERAM8D1V3 — Dual 8″ MOJO Mini Under-Seat Enclosure (1Ω)
This precision-engineered under-seat enclosure is built specifically for Ram trucks, delivering deep, powerful bass tuned for the unique acoustics of the cabin. Loaded with dual 8″ MOJO Mini subwoofers, it provides hard-hitting, accurate low-end performance without sacrificing interior space.
Overview
Ram-Specific Bass, Clean Factory-Style Fit
Designed to fit seamlessly under the rear seat, this enclosure maximizes output while maintaining a clean, factory-style appearance. The side-ported design and MOJO Mini subwoofers are tuned to deliver deep, controlled bass that fills the cabin without overpowering it.
Installation is straightforward and reversible thanks to the included 1/2″ rear seat spacers. These spacers lift the seat just enough to accommodate the enclosure, with no permanent vehicle modifications required.
Enclosure Design
Built for Output, Durability, and Easy Install
The enclosure features a durable Memphis-branded bedliner finish for long-term protection in a truck environment. Protective high-excursion grills shield the subwoofers while allowing full cone movement during high-output playback.
- Side-ported enclosure tuned for strong low-end response.
- Memphis-branded bedliner coating for durability.
- Protective high-excursion grills included.
Installation
No Permanent Modifications Required
A two-piece enclosure design allows for safer shipping and easier handling during installation. Included seat spacers raise the rear seat by 1/2″, providing the necessary clearance while remaining fully removable if you ever want to return the seat to its original height.
- Fits under the rear seat of compatible Ram trucks.
- 1/2″ seat spacers included for proper clearance.
- Two-piece design simplifies install and transport.
Vehicle Compatibility
Designed for 2002–2018 Ram Trucks
This enclosure is engineered specifically for Ram Quad Cab and Crew Cab trucks from 2002 to 2018, ensuring proper fitment and optimal acoustic performance within the cabin.
Designed for 2002–2018 Ram Quad Cab and Crew Cab models. Always verify vehicle configuration before installation.
| Model | MJMERAM8D1V3 |
| Application | 2002–2018 Ram Quad Cab / Crew Cab |
| Subwoofers | Dual 8″ MOJO Mini |
| Final Impedance | 1 Ohm |
| Power Handling (RMS / Peak) | 1800W / 3600W |
| Enclosure Type | Side-ported, under-seat |
| Finish | Memphis-branded bedliner coating |
| Design | Two-piece enclosure |
This enclosure is ideal for Ram truck owners looking for serious bass performance without sacrificing cabin space or making permanent modifications. It delivers MOJO Mini output with a clean, factory-style fit.
1x Memphis Audio MJP1500.1 Monoblock Subwoofer Amplifier - 1500 Watts RMS x 1 at 1-Ohm (MJP1500.1)
MJP1500.1 – MOJO Pro Monoblock Amplifier
1500W RMS @ 1Ω • Strap-Able High-Output Mono Amplifier
MOJO Pro amplifiers are built for extreme output and aggressive system designs. The MJP1500.1 monoblock amplifier features a rugged extruded aluminum chassis with exposed aluminum accents and a signature orange MOJO accent strip. Designed for pro-audio style systems, this strap-able mono amplifier delivers massive power with the tuning flexibility required to push subwoofer systems to their limits.
Overview
MOJO Pro Power with System-Building Flexibility
The MJP1500.1 is designed to deliver serious low-frequency output for high-power subwoofer systems. With up to 1500 watts RMS at 1 ohm and a strap-able mono configuration, this amplifier allows multiple units to be combined for even greater output potential. Variable crossover and EQ controls make it easy to dial in clean, hard-hitting bass.
- High-output monoblock design optimized for subwoofer systems.
- Strap-able architecture for extreme multi-amp builds.
- Installer-friendly tuning controls.
Built for aggressive systems that demand power, control, and durability.
Design
Rugged Extruded Aluminum Chassis
The extruded aluminum heat sink is designed to dissipate heat efficiently while maintaining a bold, industrial look. Exposed aluminum accents and the signature orange MOJO strip make the MJP1500.1 a standout centerpiece in any build.
- Extruded aluminum heat sink.
- Exposed aluminum accents.
- MOJO orange accent strip.
Features
Control & Output Tuning
| Amplifier Type | Monoblock |
| RMS Power @ 4Ω | 675 W x 1 |
| RMS Power @ 2Ω | 1050 W x 1 |
| RMS Power @ 1Ω | 1500 W x 1 |
| THD @ 4Ω | < 1% |
| Frequency Response | 11 Hz – 200 Hz |
| Input Range | 200 mV – 6 V (Low) / 3 V – 20 V (High) |
| Dimensions (L × W × H) | 7.5 × 11 × 2 in |
| Recommended Amp Kit | 0GKIT |
1x Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs (0GKIT)
0GKIT – 0 Gauge Amplifier Installation Kit
True AWG OFC Wiring • Complete High-Performance Amp Install Solution
Memphis 0GKITS are engineered for serious power delivery using true standard AWG wire made from 100% pure oxygen-free copper. Amplifier performance is directly affected by the quality of wiring and connections, and this kit delivers the clean, reliable power that professional installers across the nation trust. The 0GKIT includes everything required for a high-current amplifier installation—including interconnects— making it one of the highest-quality 0 gauge amp kits on the market.
Overview
True 0 Gauge Power for Maximum Amplifier Performance
Designed to support high-current amplifiers, the Memphis 0GKIT uses true AWG oxygen-free copper wiring to ensure maximum conductivity and minimal voltage drop. This kit eliminates the compromises found in low-quality wiring solutions and provides everything needed for a clean, professional-grade amplifier installation.
- True standard AWG wire made from 100% OFC.
- Supports high-power amplifier systems.
- Includes interconnects and distribution hardware.
Built with the materials and components professionals rely on for clean, powerful performance.
Construction
Premium Materials & Hardware
The 0GKIT includes satin chrome plated brass components, nickel-plated terminals, and durable frosted jacket wiring for long-lasting performance and corrosion resistance.
- Satin chrome plated brass fuse blocks and terminals.
- Nickel-plated ring terminals and ground lug.
- Durable frosted wire jackets for easy routing.
Kit Features
Complete High-Current Installation Solution
What’s Included
In the Box
- 25’ 1/0 AWG frosted orange power wire
- 2’ 1/0 AWG frosted black ground wire
- 8’ 4 AWG frosted orange power wire
- 4’ 4 AWG frosted black ground wire
- 20’ 18 AWG blue remote turn-on wire
- 17’ 2-channel parallel interconnect
- 17’ 4-channel parallel interconnect
- ANL fuse block (satin chrome plated brass)
- 250A ANL fuse (nickel plated)
- Battery terminal (satin chrome plated brass)
- (2) Power distribution blocks (satin chrome plated brass)
- Nickel plated ground lug
- (3) 1/0 AWG nickel plated ring terminals
- (1) 1/0 AWG snap bushing
- (8) 8" black cable ties
- (4) ST3.9 × 16mm black set screws
- Complete hardware pack
| Model | 0GKIT |
| Power Wire Gauge | 0 AWG |
| Wire Material | 100% Oxygen-Free Copper (OFC) |
| Fuse Type | ANL |
| Interconnects | (3) ETP-17 parallel interconnects |