Description
Included in this kit
This bundle includes 2x Memphis Audio PRXL12FTV PRX 12" 500W Selectable 1/2/4 Ohm Subwoofer W/RGB, a Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier - 1000 Watts RMS x 1 at 1-Ohm, and a Memphis Audio 4GKIT 4-Gauge Amp Install Kit With ANL Fuse Holder With One 200A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
2x Memphis Audio PRXL12FTV PRX 12" 500W Selectable 1/2/4 Ohm Subwoofer W/RGB (PRXL12FTV)
PRXL12FT – 12" FLEX Triple Selectable Impedance RGB LED Subwoofer
The Memphis Audio PRXL12FT combines 500 watts RMS / 1000 watts peak power handling with FLEX Triple Voice Coil Technology, allowing the subwoofer to be configured for 1-Ohm, 2-Ohm, or 4-Ohm impedance using a simple jumper plug. An RGB LED accent light surrounds the edge of the cone, adding customizable illumination to the 12-inch subwoofer.
Overview
Selectable Impedance for Flexible System Integration
FLEX Triple Voice Coil Technology gives the PRXL12FT three selectable impedance configurations from a single subwoofer. Using a simple jumper plug, the subwoofer can be switched between 1-Ohm, 2-Ohm, and 4-Ohm operation.
The 12-inch driver is rated for 500 watts RMS and 1000 watts peak, combining flexible impedance selection with a design suited for custom installations and factory audio upgrades.
- 12" FLEX Triple Selectable Impedance design.
- Selectable 1-Ohm, 2-Ohm, or 4-Ohm configuration.
- 500W RMS / 1000W peak power handling.
RGB Illumination
Illuminated Cone Accent
An RGB LED accent light encircles the edge of the cone, giving the PRXL12FT an illuminated custom look alongside its bass performance.
The LED lighting requires a hardwired connection to a 12V source. The Memphis RGB Controller MXRGBBTC can also be used and is sold separately.
Feature Highlights
Performance, Cooling & Construction
Cooling & Engineering
Direct Voice Coil Cooling
Memphis Audio's DVVC Direct Voice Coil Cooling technology helps maximize thermal efficiency during extended, high-powered operation. The PRXL12FT uses a 2-inch voice coil and a 63-ounce magnet.
- DVVC Direct Voice Coil Cooling technology.
- 2" voice coil diameter.
- 63 oz magnet.
Cone & Suspension
Built for Durability & Bass Control
The PRXL12FT combines a black-on-black polypropylene cone with a stitched butyl rubber surround, reinforced spider, and improved suspension. Woven tinsel leads complete the driver construction.
- Black-on-black polypropylene cone.
- Stitched butyl rubber surround.
- Reinforced spider and improved suspension.
- Woven tinsel leads.
Installation
12" Mounting Dimensions
The PRXL12FT requires an 11-inch cutout diameter and has a 5.5-inch mounting depth. Its selectable impedance system provides 1-Ohm, 2-Ohm, and 4-Ohm configuration options from the same driver.
- Mounting depth: 5.5".
- Cutout diameter: 11".
- Selectable 1-Ohm, 2-Ohm, or 4-Ohm impedance.
The RGB LED lighting must be hardwired to a 12V source, or it can be used with the Memphis RGB Controller MXRGBBTC. The MXRGBBTC controller is sold separately.
| Model | Memphis Audio PRXL12FT |
| Size | 12" |
| Voice Coil / Impedance | Tri Flex Selectable VC – 1-Ohm, 2-Ohm, or 4-Ohm |
| RMS Power | 500W |
| Peak Power | 1000W |
| Sensitivity – 1-Ohm | 85.6 dB |
| Sensitivity – 2-Ohm | 85.5 dB |
| Sensitivity – 4-Ohm | 86 dB |
| Magnet Size | 63 oz |
| Voice Coil Diameter | 2" |
| Mounting Depth | 5.5" |
| Cutout Diameter | 11" |
| Cone | Black-on-black polypropylene |
| Surround | Stitched butyl rubber |
| Suspension | Reinforced spider and improved suspension |
| Cooling | DVVC Direct Voice Coil Cooling technology |
| Leads | Woven tinsel leads |
| Lighting | RGB LED illuminated cone |
RGB LED illumination requires a hardwired 12V source or the Memphis RGB Controller MXRGBBTC, sold separately.
1x Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier - 1000 Watts RMS x 1 at 1-Ohm (PRX1000.1V2)
PRX1000.1V2 – Power Reference Monoblock Amplifier
1000W RMS @ 1Ω • Compact High-Output Design
Power Reference amplifiers deliver an ideal balance of compact size and serious performance. The PRX1000.1V2 has been redesigned with a significantly smaller footprint while maintaining the power and control Power Reference is known for. Featuring a sleek LED-accented acrylic top panel, hidden top-mounted controls, and undermount LED lighting, this amplifier provides both high-end aesthetics and reliable subwoofer performance in tight installation spaces.
Overview
Big Power in a Smaller Package
The PRX1000.1V2 is engineered to deliver powerful, controlled low-frequency output while fitting into installations where space is limited. Producing up to 1000 watts RMS at 1 ohm, this monoblock amplifier is ideal for driving high-performance subwoofers with authority. Advanced tuning controls allow precise adjustment to match enclosure and system requirements.
- Redesigned compact chassis for flexible installation.
- High-output monoblock design for dedicated subwoofer systems.
- Optimized for reliability and consistent performance.
Reduced footprint without sacrificing output or control.
Design & Styling
Clean Install, Custom Look
A blue LED-accented acrylic top panel conceals the amplifier’s top-mounted controls for a clean, professional appearance. Undermount blue LED lighting adds a custom touch, making the PRX1000.1V2 stand out while remaining subtle and refined in high-end installations.
- Blue LED top cover.
- Blue LED ground lighting.
- Hidden top-mounted controls.
Features
Advanced Tuning & Control
| Amplifier Type | Monoblock |
| RMS Power @ 4Ω | 400 W x 1 |
| RMS Power @ 2Ω | 750 W x 1 |
| RMS Power @ 1Ω | 1000 W x 1 |
| THD @ 4Ω | < 1% |
| Frequency Response | 10 Hz – 250 Hz |
| Dimensions (L × W × H) | 8.6 × 5.7 × 2.16 in |
| Recommended Amp Kit | 4GKIT |
1x Memphis Audio 4GKIT 4-Gauge Amp Install Kit With ANL Fuse Holder With One 200A Fuse, And A Pair Of ETP-17 17-Foot RCAs (4GKIT)
Memphis Audio 4GKIT – 4 Gauge Amplifier Installation Kit
Memphis Audio amplifier installation kits are built using true standard AWG wire made from 100% pure oxygen-free copper to ensure maximum power transfer and reliable performance. The 4GKIT includes everything required to properly install your amplifier, including high-quality RCA interconnects, making it one of the highest performance 4-gauge amp kits available.
Overview
Proper Power for Maximum Amplifier Performance
Your amplifier’s performance is directly affected by the quality of the wiring and connections used. The Memphis Audio 4GKIT is engineered using true oxygen-free copper wiring and high-quality termination components to ensure consistent voltage delivery and clean signal transfer. Trusted by installers nationwide, this kit provides the foundation for dependable amplifier performance.
- True standard AWG wire for accurate current capacity
- Oxygen-free copper for improved conductivity
- Complete kit for a clean, professional installation
Included Components
Everything You Need in One Kit
- 17' 4-AWG frosted orange power wire
- 3' 4-AWG frosted black ground wire
- 17' 18-AWG blue remote turn-on wire
- (2) 17' 2-channel parallel RCA interconnects
- ANL fuse block with satin chrome plated brass
- Nickel plated 200A ANL fuse
- (4) 4-AWG nickel plated ring terminals
- (2) 4-AWG snap bushings
- (2) 22–18 AWG butt splices
- (6) 6" black cable ties
Application
Installer-Grade Reliability
Designed for performance-focused installations, the 4GKIT is ideal for powering a wide range of amplifiers where consistent current delivery and dependable connections are critical. This kit eliminates guesswork by providing matched, high-quality components trusted by professional installers.
| Model | 4GKIT |
| Power Wire Gauge | 4 AWG |
| Fuse Holder Type | ANL |
| Interconnects | (2) ETP-17 |