SpeakerCraft MT6 THREE | ASM87630
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.
AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.
These speakers are left and right specific and only sold in pairs.
Specifications
General
Family - Specialty
Woofer Size - 6.5 (Inches)
Woofer Construction - 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug
Frequency Response - 40Hz - 20kHz
Impedance - 8 (Ohms)
Power Handling - 125 (Watts)
Sensitivity - 90 (dB)
Timbre - Timbre-Matched to All Three Series Speakers
Dimensions - (H x W x D) 12 ¼" x 8 3/16" x 3 3/16" (311 mm x 208 mm x 81 mm)
Hole Cutout Dimensions - (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm)
Lifetime Warranty
Other Specifications
6 1/2" Aluminum Cone Woofer with Dual Voice Coil, Filleted Rubber Surround & Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Buttons Allow for up to ±3dB of Bass and Treble Adjustment
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.
AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.
These speakers are left and right specific and only sold in pairs.
Specifications
General
Family - Specialty
Woofer Size - 6.5 (Inches)
Woofer Construction - 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug
Frequency Response - 40Hz - 20kHz
Impedance - 8 (Ohms)
Power Handling - 125 (Watts)
Sensitivity - 90 (dB)
Timbre - Timbre-Matched to All Three Series Speakers
Dimensions - (H x W x D) 12 ¼" x 8 3/16" x 3 3/16" (311 mm x 208 mm x 81 mm)
Hole Cutout Dimensions - (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm)
Lifetime Warranty
Other Specifications
6 1/2" Aluminum Cone Woofer with Dual Voice Coil, Filleted Rubber Surround & Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Buttons Allow for up to ±3dB of Bass and Treble Adjustment
- SKU:
- MT6THREE
- UPC:
- 664254650697
- Condition:
- New
- Availability:
- In stock and ready to ship!
- Shipping:
- Free 2-Day Shipping!
UPC: |
664254650697 |
Bundle: |
Yes |
Feature 1: |
By gently caressing aluminum into cones, adding synthetic cooling liquids for heat dissipation, and adjusting the dividing network to optimally blend the bass and treble tones, the CRS6 THREE just allows you to sit back and enjoy. |
Feature 2: |
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. |
Feature 3: |
Since wall construction varies from house to house, we wanted to give the dealer an opportunity to improve the wall’s integrity. AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the |
Feature 4: |
Woofer Size - 6.5 (Inches), Woofer Construction 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug |
Feature 5: |
Limited Lifetime Warranty - SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Deal |
Condition: |
NEW |
Manufacturer SKU: |
ASM87630 |
Weight: |
11.0000 lbs |
ASIN: |
B01N5OBXOM |
