Description
Included in this kit
This bundle includes a MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier, and a Memphis Audio PRX102W 10" Power Reference Single 2-Ohm Subwoofer Replacement, 250 Watts RMS, No Magnet Boot, Spade Terminals.
1x MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier - (JH7005)
MTX JH7005
Jackhammer Series 700 Watt Five Channel Full System Amplifier
Easy Access Controls
The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost.
Only What You Need
The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 5-channel, 4-channel or 2-channel modes depending on the Input Mode selection.
High Quality Power and Speaker Connections
The JH7005 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • All-In-One System Design
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Variable Subsonic Filter
• Remote Bass Knob
SPECIFICATIONS • Description: 5-Channel
• Topology: Class AB + D
• 4Ω RMS Power Output: 60W X 4 Channel, 275W x 1 Channel
• 4Ω Bridged: 180W x 2 Channel
• 2Ω RMS Power Output: 90W x 4 Channel, 450W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 60dB
• Frequency Response: 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer)
• Crossover: 40Hz to 250Hz, 12dB/Oct
• High Pass Filter: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 15.47" (393mm)
1x Memphis Audio PRX102W 10" Power Reference Single 2-Ohm Subwoofer Replacement, 250 Watts RMS, No Magnet Boot, Spade Terminals - (PRX102W)
This is a replacement Woofer intended for Memphis loaded enclosures. This woofer does not have spring terminals or a rubber magnet boot like the retail versions of these woofers.
Memphis Audio 15-PRX102W 10" Power Reference Single 2-Ohm Subwoofer - 250 w RMS
Power Reference
Memphis Audio's best selling line of subwoofers is back and better than ever. The new black on black polypropylene dust cap steps up design element to a level never before in the line. Several performance enhancements including a high temperature TIL voice coil former, improved suspension and coil design and an upgraded reinforced spider shoulder elevate PR subwoofers to new heights. Audio enthusiasts respect Power Reference subwoofers for their reliability and performance and versatility.
Power Reference subwoofers are a staple of the Memphis line. Proven performance and reliability is the reason Power Reference is our best selling subwoofer.
Does not feature a boot on the woofer magnet for protection
Features spade terminals & not spring terminals.
Features:
• High temperature TIL voice coil former
• Double stitched butyl rubber surround
• Black on black polypropylene dust cap
• Woven tinsel leads
• Improved suspension and coil design
• Reinforced spider shoulder
Specifications:
• Size (in) 10"
• RMS Power (w) 250
• Peak Power (w) 500
• Sensitivity (dB) 83
• Magnet Size (Oz) 60
• Mounting Depth (in) 5.18
• Cut Out Diameter (in) 9.25
• Voice Coil Diameter (in) 2
• Warranty 1 year
**PRXG10 GRILLS FIT 10" PR SUBWOOFERS (GRILLS NOT INCLUDED)