Description
Included in this kit
This bundle includes a MTX Audio THUNDER65 Thunder Series 6.5", 2-Way, 60W RMS 4-Ohm Coaxial Speaker Pair, a MTX Audio THUNDER693 Thunder Series 6x9", 3-Way, 100W RMS 4-Ohm Coaxial Speaker Pair, 2x Metra 72-8104 Toyota 1987-Up Speaker Harness - Pair, a Memphis Audio OEMBKT60 Vehicle Specific 6 1/2" Speaker Adaptors (Pair), and a Memphis Audio OEMBKT69 Vehicle Specific 6X9" Speaker Adaptors (Pair).
1x MTX Audio THUNDER65 Thunder Series 6.5", 2-Way, 60W RMS 4-Ohm Coaxial Speaker Pair (THUNDER65)
MTX THUNDER65
6.5" 2-WAY 60-WATT RMS 4Ω COAXIAL SPEAKER PAIR
Rich Bass
The THUNDER65 is a 6.5" 2-way coaxial speaker pair that can handle up to 60-watts RMS power. THUNDER speakers are set apart from the "other guys" because of its ability to reproduce low frequencies that other speakers cannot reproduce.
No Subwoofer Required!
While no car speaker can produce bass like a subwoofer, these speakers truly shine in the lower frequencies. The THUNDER Series Coaxial offers it all. You will have incredibly clear response with the built-in tweeter, and plenty of Low THUNDER response from this speaker's Polypropylene cone. The rubber surround will shrug off the weather and wear that come with living in your car full-time.
Audio Imaging
The THUNDER65 uses a polypropylene woofer that is incredibly durable and a 15 degree pivoting tweeter to assist in obtaining the best imaging based on install location. The speakers concave cone design also assists in delivering exceptional imaging especially when speakers are mounted in the doors of a vehicle. This model includes a high temperature 4Ω voice coil and incorporates Spider Plateau Venting to ensure cool air is targeting the voice coil ensuring reliability over time.
FEATURES
• Extended Low Frequency Reproduction - Allows the speaker to deliver a Bigger, Fuller Sound
• Concave Cone Design - Produces Improved Off-Axis Response
• Pivoting Tweeter - To allow for Improved Imaging in Any Installation Location the Tweeter can Pivot 15° in Any Direction.
SPECIFICATIONS
• RMS Power (Watts) 60
• Sensitivity 92dB
• Frequency Response 48Hz - 20kHz
• Cone Material Polypropylene
• Grille Included Yes
• Woofer Mounting Depth 2.063"
1x MTX Audio THUNDER693 Thunder Series 6x9", 3-Way, 100W RMS 4-Ohm Coaxial Speaker Pair (THUNDER693)
MTX THUNDER693
6" X 9" 3-WAY 100-WATT RMS 4Ω COAXIAL SPEAKER PAIR
THUNDER Series speakers are designed to compliment any installation while delivering a full range sound experience for all types of music. Get the most out of your music and hear it as the artist performed it.
Rich Bass
The THUNDER693 is a 6" x 9" 3-way coaxial speaker pair that can handle up to 100-watts RMS power. THUNDER speakers are set apart from the "other guys" because of its ability to reproduce low frequencies that other speakers cannot reproduce.
No Subwoofer Required!
The Thunder Coaxials offer unbeatable performance for the price in their class. They provide outstanding low frequency reproduction, easy installation, and are great as factory replacements with or without an additional amplifier.
While no car speaker can produce bass like a subwoofer, these speakers truly shine in the lower frequencies. The THUNDER Series Coaxial offers it all. You will have incredibly clear response with the built-in tweeter, and plenty of Low THUNDER response from this speaker's Polypropylene cone. The rubber surround will shrug off the weather and wear that come with living in your car full-time.
Ready for an easy-to-install speaker with an awesome price? Then let the "THUNDER ROLL" with the THUNDER Coaxials.
FEATURES
• Extended Low Frequency Reproduction - Allows the speaker to deliver a Bigger, Fuller Sound
• Concave Cone Design - Produces Improved Off-Axis Response
SPECIFICATIONS
• RMS Power (Watts) 100
• Sensitivity 92dB
• Frequency Response 42Hz - 20kHz
• Cone Material Polypropylene
• Grille Included Yes
• Woofer Mounting Depth 3.0"
2x Metra 72-8104 Toyota 1987-Up Speaker Harness - Pair (72-8104)
TOYOTA 87-Up Speaker Harness
Sold as pair
1x Memphis Audio OEMBKT60 Vehicle Specific 6 1/2" Speaker Adaptors (Pair) (OEMBKT60)
Memphis Audio • OEM Speaker Mounting
Memphis Audio OEMBKT60 – Vehicle-Specific 6.5" / 6×9" Speaker Adaptor Brackets
Memphis OEM Speaker Brackets are engineered to fit all Memphis Audio 6.5" and 6×9" speakers, with precision tabs and mounting holes designed to integrate into many factory vehicle locations. These brackets help eliminate the need for custom speaker solutions and simplify OEM-style speaker upgrades.
Fits Memphis 6.5" & 6×9" speakers
Removable tabs
High-grade polypropylene
Gapless fit design
Secure, long-lasting fit
Fits select vehicles (list below)
Overview
OEM-Style Mounting for Easier Speaker Upgrades
The OEMBKT60 brackets are built to help you mount Memphis Audio speakers into factory locations with a clean, integrated fit. Precision tabs and mounting holes are designed to match a wide range of vehicles, reducing the need for hard-to-find mounting solutions.
- Engineered to fit all Memphis Audio 6.5" and 6×9" speakers.
- Designed for a gapless fit in select factory locations.
- Built to create a secure, long-lasting installation.
Construction
High-Grade Polypropylene + Multi-Vehicle Tabs
Made from high-grade polypropylene, OEMBKT60 brackets use removable tabs to support fitment across multiple vehicles and mounting patterns.
- High-grade polypropylene construction.
- Removable tabs to fit multiple vehicles.
- Supports 6×9" and oversized 6.5" options.
Feature Highlights
OEMBKT60 Key Features
Fits Memphis Speaker Lines
Engineered to fit all lines of Memphis speakers in 6.5" and 6×9" sizing.
Removable Tabs
Removable tabs allow the bracket to adapt to multiple vehicle applications.
Gapless Fit Design
Designed for a gapless fit to support an OEM-style finished install.
High-Grade Polypropylene
Durable polypropylene construction intended for long-term, secure mounting.
6×9" + Oversized 6.5" Options
Supports 6×9" and oversized 6.5" fitment needs in select factory locations.
Secure Long-Lasting Fit
Built to provide a stable, secure fit for upgraded speaker installs.
Vehicle Fitment
Fits Select Models
Fits select Buick, Cadillac, Chevrolet, GMC, Dodge, Ford, Lincoln, Toyota, Scion, Subaru, Nissan, Chrysler, and Lexus models as listed below.
Buick
- Lacrosse 2007-Current
- Lucerne 2007-2011
- Enclave 2007-Current
- Regal 2011-Current
- Verano 2012-2017
- Encore 2013-Current
- Cascade 2012-2019
- Envision 2016-Current
Cadillac
- CTS 2014-Current
- SRX 2010-2016
- Escalade 2007-Current
- ATS 2013-Current
- XTS 2013-Current
Chevrolet
- Avalanche 2007-2013
- Cobalt 2007-2010
- Impala 2007-Current
- Colorado 2015-Current
- Silverado 2007-Current
- Suburban 2007-Current
- Tahoe 2007-Current
- Traverse 2009-Current
- Camaro 2010-Current
- Malibu 2008-Current
- Cruze 2011-2019
- Volt 2011-2019
- Sonic 2012-Current
- SS 2014-2016
- Trax 2015-2019
- Spark 2016-2019
- Bolt 2017-2019
- Equinox 2018-Current
GMC
- Acadia 2007-Current
- Sierra/Sierra Denali 2007-Current
- Yukon/Yukon XL/Denali 2007-Current
- Canyon 2015-Current
Dodge
- Avenger 2008-2014
- RAM 2010-Current
- Caliber 2007-2012
- Caravan 2008-Current
- Challenger 2008-Current
- Charger 2006-Current
- Journey 2009-Current
- Dakota 1997-2011
- Durango 1998-2017
Chrysler
- 300 2011-Current
- 200 2015-2017
Ford
- Explorer 2011-Current
- F-150 2015-2021
- F-250, F-350, F-450, F-550 2017-Current
- Expedition 2018-Current
- Navigator 2018-Current
- Edge 2015-Current
- Escape 2015-Current
- Fiesta 2011-2019
- Focus 2011-2018
- Mustang 2015-Current
- Transit 2015-Current
- Ranger 2019-Current
- Bronco 2011-Current
- Maverick 2022-Current
Lincoln
- MKZ 2015-Current
- Navigator 2018-Current
Toyota
- 4Runner 2002-Current
- Avalon 2005-2014
- Camry 2011-Current
- Corolla 1998-Current
- FJ Cruiser 2006-2018
- Highlander 2001-Current
- Land Cruiser 2003-2020
- Prius 2001-2020
- Sequoia 2008-Current
- Tacoma 2004-2020
- Tundra 2000-Current
- Venza 2009-2015
- Rav-4 2001-2020
- Sienna 1998-2020
- Matrix 2003-2014
- FJ Cruiser 2007-2014
- Yaris 2007-Current
Scion
- XB 2007-2015
- TC 2005-2016
- XD 2008-2014
- IQ 2012-2015
- FR-s 2013-2016
Subaru
- Crosstek 2018-Current
- Impreza 2017-Current
- Legacy 2015-Current
- Outback 2018
Nissan
- 350Z 2003-2009
- Altima 1998-2019
- Armada 2005-2019
- Cube 2009-2014
- Frontier 1998-2019
- GTR 2009-2016
- Juke 2011-2017
- Leaf 2012-2019
- Maxima 2000-2019
- Murano 2003-2019
- NV 2012-2019
- Pathfinder 1998-2019
- Quest 2004-2016
- Sentra 2000-2019
- Rouge 2008-2019
- Titan 2004-Current
- Verse 2007-2019
- Xterra 2000-2015
Lexus
- RX 1999-Current
- IS 2002-Current
- ES 2004-Current
- GS 2006-Current
- GX 2004-Current
- NX 2015-Current
Fitment Note
Vehicle fitment is provided as listed in the supplied data. Always verify factory mounting location and speaker size (6.5" / 6×9") prior to installation.
Vehicle fitment is provided as listed in the supplied data. Always verify factory mounting location and speaker size (6.5" / 6×9") prior to installation.
Product Summary – Memphis OEMBKT60
| Model | OEMBKT60 |
| Application | Vehicle-specific speaker adaptor brackets |
| Speaker Compatibility | Fits all Memphis Audio 6.5" and 6×9" speakers (including 6×9" and oversized 6.5" options) |
| Construction | High-grade polypropylene |
| Design Features | Precision tabs & mounting holes; removable tabs; designed for a gapless, secure fit |
Specifications and fitment lists are based solely on the provided product data and are subject to change without notice.
Confirm vehicle application and mounting location compatibility prior to installation.
1x Memphis Audio OEMBKT69 Vehicle Specific 6X9" Speaker Adaptors (Pair) (OEMBKT69)
Memphis Audio • OEM Speaker Mounting
Memphis Audio OEMBKT69 – Vehicle-Specific 6×9" Speaker Adaptor Brackets
Memphis OEM Speaker Brackets are engineered to fit all Memphis Audio 6.5" and 6×9" speakers, with the OEMBKT69 specifically designed for factory 6×9" mounting locations. Precision tabs and mounting holes allow seamless integration into select vehicles, eliminating the need for custom fabrication or hard-to-find mounting solutions.
6×9" OEM speaker adaptor
Fits Memphis Audio speakers
Removable vehicle-specific tabs
High-grade polypropylene
Gapless OEM-style fit
Vehicle-specific applications
Overview
Designed for OEM 6×9" Speaker Locations
The OEMBKT69 speaker adaptor brackets are built to simplify upgrading factory 6×9" speakers while maintaining a clean, OEM-style appearance. Precision-molded tabs and mounting points align with factory locations across a wide range of vehicles.
- Designed for OEM 6×9" speaker mounting locations.
- Fits all lines of Memphis Audio speakers.
- Eliminates the need for custom mounting solutions.
Construction
Durable, Vehicle-Adaptive Design
Built from high-grade polypropylene, OEMBKT69 brackets are designed for long-term durability and secure installation. Removable tabs allow the bracket to adapt to multiple vehicle platforms while maintaining a tight, gapless fit.
- High-grade polypropylene construction.
- Removable tabs to fit multiple vehicles.
- Designed for a secure, long-lasting fit.
Feature Highlights
OEMBKT69 Key Features
6×9" OEM Fitment
Engineered specifically for factory 6×9" speaker locations.
Fits Memphis Audio Speakers
Compatible with all lines of Memphis Audio 6.5" and 6×9" speakers.
Removable Tabs
Adjustable tab design supports multiple vehicle applications.
Gapless OEM-Style Fit
Designed to sit cleanly in factory locations without gaps.
High-Grade Polypropylene
Durable construction intended for long-term, vibration-resistant mounting.
Secure Installation
Precision mounting holes provide a stable, long-lasting speaker upgrade.
Vehicle Fitment
OEMBKT69 – 6×9" Applications
The OEMBKT69 brackets fit select vehicles with factory 6×9" speaker locations. Fitment is based on the OEMBKT69-specific list only.
Buick
- Lacrosse 2007–Current
- Envision 2016–Current
Cadillac
- CTS 2014–Current
- XTS 2013–Current
Chevrolet
- Colorado 2015–Current
- Silverado 2007–Current
- Suburban 2007–Current
- Tahoe 2007–Current
- Traverse 2018–Current
- Camaro 2015–Current
- Impala 2014–Current
GMC
- Sierra / Sierra Denali 2014–Current
- Yukon / Yukon XL / Denali 2015–Current
- Canyon 2015–Current
Dodge
- Avenger 2008–2014
- RAM 2010–Current
- Caliber 2007–2012
- Caravan 2008–Current
- Challenger 2008–Current
- Charger 2006–Current
- Journey 2009–Current
Ford
- Explorer 2011–Current
- F-150 2015–2021
- F-250 / F-350 / F-450 / F-550 2017–Current
- Expedition 2018–Current
- Navigator 2018–Current
Lincoln
- Navigator 2018–Current
Toyota
- 4Runner 2002–Current
- Avalon 2005–2014
- Camry 2011–Current
- FJ Cruiser 2006–2018
- Highlander 2008–Current
- Land Cruiser 2008–2014
- Prius 2010–2015
- Sequoia 2008–Current
- Tacoma 2004–2016
- Tundra 2007–Current
- Venza 2009–2015
- Sienna 2004–Current
Subaru
- Crosstrek 2018–Current
- Impreza 2017–Current
- Legacy 2015–Current
- Outback 2018
Lexus
- RX 2004–2016
- GX 2004–2013
Fitment Note
Vehicle applications are based on the OEMBKT69 6×9" fitment list only. Always verify factory speaker size and mounting location before installation.
Vehicle applications are based on the OEMBKT69 6×9" fitment list only. Always verify factory speaker size and mounting location before installation.
Product Summary – Memphis OEMBKT69
| Model | OEMBKT69 |
| Application | Vehicle-specific 6×9" speaker adaptor brackets |
| Speaker Compatibility | Fits all Memphis Audio 6.5" and 6×9" speakers |
| Construction | High-grade polypropylene |
| Design Features | Removable tabs, precision mounting holes, gapless OEM-style fit |
Specifications and vehicle fitment are based solely on the provided OEMBKT69 data and are subject to change without notice.
Always confirm speaker size and factory mounting location prior to installation.