Description
Included in this kit
This bundle includes a MTX Audio JH10001 Jackhammer Series 1100W x 1 @ 1-Ohm Class D Mono Block Amplifier, and a MTX TL-DBE - 2-Channel Line Output Converter with Digital Bass Enhancer.
1x MTX Audio JH10001 Jackhammer Series 1100W x 1 @ 1-Ohm Class D Mono Block Amplifier (JH10001)
MTX JH10001
Jackhammer Series 1000 Watt Monoblock Subwoofer Amplifier
Easy Access Controls
Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH10001 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH10001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.
High Quality Power and Speaker Connections
The JH10001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH10001 can play loads down to 1Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Remote Bass Knob
SPECIFICATIONS • Description: Mono Block
• Topology: Class D
• 4Ω RMS Power Output: 450W x 1 Channel
• 2Ω RMS Power Output: 775W x 1 Channel
• 1Ω RMS Power Output: 1100W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 68dB
• Frequency Response: 20Hz - 250Hz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 12.24" (311mm)
1x MTX TL-DBE - 2-Channel Line Output Converter with Digital Bass Enhancer (TL-DBE)
TL-DBE 2-Channel Line Output Converter with Digital Bass Enhancer
The MTX TL-DBE is a 2-channel line output converter with digital bass enhancement designed to connect factory audio systems to aftermarket amplifiers. Built to correct bass roll-off common in many factory head units, it delivers a clean preamp signal, restores low-frequency performance, and adds flexible installation options without sacrificing factory system functionality.
Overview
Factory Integration with Added Bass Control
The TL-DBE is built to help bridge factory audio systems with aftermarket amplifiers by converting factory signal into a cleaner preamp-level output. It is designed specifically to address bass loss that often occurs in modern factory systems as volume increases.
In addition to signal conversion, the TL-DBE adds variable digital bass enhancement and an included external bass control, giving users direct control over low-frequency restoration from the driver’s seat.
- 2-channel line output converter with digital bass enhancement.
- Designed for factory-to-aftermarket amplifier integration.
- Built to restore bass roll-off at higher listening levels.
Compact Design
Easy to Mount in Tight Spaces
With a compact chassis measuring just 5 inches long, 3 7/8 inches wide, and 1 1/8 inches deep, the TL-DBE is built for discreet installations. Its small footprint makes it easier to mount under seats, behind trim panels, or near factory audio components.
- Compact 5" x 3 7/8" x 1 1/8" chassis.
- Designed for under-seat, behind-panel, or near-component mounting.
- Supports cleaner, low-visibility installations.
Feature Highlights
What the TL-DBE Adds to a System
Signal Integration
Handles High- and Low-Level Inputs
The TL-DBE accepts both high-level speaker inputs and low-level RCA inputs, allowing it to work with a wide variety of source systems. With support for factory speaker outputs up to 40V RMS, it is designed to capture signal cleanly from factory radios and factory-amplified systems.
- Low/high level input support.
- Maximum input level of 40Vrms / 400W (20kΩ).
- Designed for clean signal delivery to aftermarket amplifiers.
Setup & Output Control
Clean Output with Easier Level Setting
Integrated gain controls and clip indicators help simplify setup and make it easier to dial in clean output levels. The TL-DBE provides two preamp outputs with up to 8.5Vrms output level for strong amplifier signal drive.
- 2 preamp outputs.
- Maximum output level of 8.5Vrms.
- Integrated gain controls and clip indicators.
The TL-DBE is designed to preserve factory system functionality while adding clean signal conversion and bass restoration for aftermarket amplifier integration.
| Model | MTX TL-DBE |
| Description | 2-channel line output converter with digital bass enhancer |
| Maximum Input Level | 40Vrms / 400W (20kΩ) |
| Input Impedance | Selectable (20Ω, 60Ω, 20kΩ) |
| Preamp Outputs | 2 |
| Maximum Output Level | 8.5Vrms |
| Output Impedance | 80Ω |
| THD | 0.08% |
| Signal to Noise Ratio | > 88dB |
| Frequency Response | 20Hz - 20kHz |
| Recommended Fuse Rating | 1A |
| Warranty Period | 24 months from date of purchase |
| Bass Correction | Corrects bass roll-off at higher volumes typical of many factory head units |
| Bass Adjustment | Variable bass enhancement |
| Input Type | Low/high level input up to 40V |
| Turn-On Modes | Multiple turn-on options (DC / remote / audio) |
| Load Matching | Selectable load resistance |
| Noise Control | Selectable ground isolation |
| Remote Control | Remote level control included |
| Length | 5" (126 mm) |
| Width | 3 7/8" (98 mm) |
| Depth | 1 1/8" (28 mm) |