Description
Versatile Power Meets Precision Control
The Diamond Audio NEO12004DSP is the definitive solution for audiophiles seeking the perfect balance of multi-channel power and sophisticated tuning with onboard 8CH DSP. As a high-efficiency Class D 4-Channel amplifier ,it delivers a robust 1200W RMS total output, 150W RMS x 4 @ 4Ω or 300W RMS x 4 @ 2Ω, providing the versatile strength needed to drive high-end component speakers or subwoofers when bridged at 600W x 2 @ 4Ω , all while maintaining the pure sonic clarity Diamond Audio is known for.
Advanced Full DSP Integration
Unlike standard multi-channel amplifiers, the NEO12004DSP features an integrated, full-service Digital Signal Processor . With 31 bands of parametric EQ per channel , precise crossovers, time delay , and channel linking, you have total command over your entire soundstage. Whether you are tuning via PC or Android , the NEO Series provides a professional-grade interface to calibrate your system for any acoustic environment.
Key Features:
Full 6CH DSP integration: 4CH internal, 2CH output. 31 band parametric EQS per channel, crossovers, time delay, channel linking, PC or Android programming for advanced tuning and much more
Easy OEM integration features:
Up to 20V signal inputs (High/Low level 20V – 0.4V)
Selectable on-board load resistors (10Ω, 20Ω, 60Ω, 20kΩ)
EV friendly voltage compatibility (8V – 17V)
Marine ready, water-resistant chassis
Staggered RCA connections for clean installations
High-current quick-connect power block
NeoDRC1 Diamond Remote Commander compatible (sold separately)
2 RCA preamp outputs for system expansion
Ultra-low distortion (0.05% THD)
Specifications
Output Power Rating
150W x 4 @ 4Ω
300W x 4 @ 2Ω
Bridged @ 4Ω: 2x600W
Frequency Response: 15Hz - 23kHz
Input Sensitivity: 0.4-20V
Signal to Noise Ratio: 85dB
THD & Noise: ≤0.03%
Dimensions(L×H×W): 223.5 X 103.3 X 35mm/ 8.8" X 4.07" X 1.38"
Net Weight: 1.02kg / 2.25lbs
The Diamond Audio NEO12004DSP is the definitive solution for audiophiles seeking the perfect balance of multi-channel power and sophisticated tuning with onboard 8CH DSP. As a high-efficiency Class D 4-Channel amplifier ,it delivers a robust 1200W RMS total output, 150W RMS x 4 @ 4Ω or 300W RMS x 4 @ 2Ω, providing the versatile strength needed to drive high-end component speakers or subwoofers when bridged at 600W x 2 @ 4Ω , all while maintaining the pure sonic clarity Diamond Audio is known for.
Advanced Full DSP Integration
Unlike standard multi-channel amplifiers, the NEO12004DSP features an integrated, full-service Digital Signal Processor . With 31 bands of parametric EQ per channel , precise crossovers, time delay , and channel linking, you have total command over your entire soundstage. Whether you are tuning via PC or Android , the NEO Series provides a professional-grade interface to calibrate your system for any acoustic environment.
Key Features:
Full 6CH DSP integration: 4CH internal, 2CH output. 31 band parametric EQS per channel, crossovers, time delay, channel linking, PC or Android programming for advanced tuning and much more
Easy OEM integration features:
Up to 20V signal inputs (High/Low level 20V – 0.4V)
Selectable on-board load resistors (10Ω, 20Ω, 60Ω, 20kΩ)
EV friendly voltage compatibility (8V – 17V)
Marine ready, water-resistant chassis
Staggered RCA connections for clean installations
High-current quick-connect power block
NeoDRC1 Diamond Remote Commander compatible (sold separately)
2 RCA preamp outputs for system expansion
Ultra-low distortion (0.05% THD)
Specifications
Output Power Rating
150W x 4 @ 4Ω
300W x 4 @ 2Ω
Bridged @ 4Ω: 2x600W
Frequency Response: 15Hz - 23kHz
Input Sensitivity: 0.4-20V
Signal to Noise Ratio: 85dB
THD & Noise: ≤0.03%
Dimensions(L×H×W): 223.5 X 103.3 X 35mm/ 8.8" X 4.07" X 1.38"
Net Weight: 1.02kg / 2.25lbs