Description
Included in this kit
This bundle includes a NOCO GENPRO10X2 2-Bank 20A Onboard Battery Charger, a NOCO GBX55 Boost X 12V 1750A Jump Starter, and a NOCO GBC102 GBX55 EVA Protection Case.
1x NOCO GENPRO10X2 2-Bank 20A Onboard Battery Charger (GENPRO10X2)
GENPRO10X2 20-Amp 2-Bank On-Board Battery Charger, Maintainer & Battery Desulfator
The NOCO GENPRO10X2 is a fully automatic two-bank onboard battery charger designed to independently charge and maintain two 12-volt batteries. Delivering 10 amps per bank and 20 amps total, it supports lead-acid and lithium-ion batteries used in marine, boat, starter, and deep-cycle applications. Selectable charging modes, automatic battery repair, thermal compensation, and IP68-rated waterproof construction provide reliable year-round battery care.
Overview
Independent Dual-Bank Charging
The GENPRO10X2 delivers 10 amps of charging current to each of its two battery banks. Each bank can be independently controlled using selectable 12V, 12V AGM, 12V Lithium, and 12V Repair modes, allowing two compatible batteries to be charged and maintained at the same time.
- 20 amps total charging output.
- Two independent 10-amp battery banks.
- Designed for 12-volt batteries up to 230Ah.
- Maintenance charging supports all battery sizes.
Compact Performance
More Power in a Smaller Design
Compared with the GEN2, the GENPRO10X2 is 19% smaller and delivers over 33% more power. Its compact form factor uses high-frequency switch-mode charging technology and onboard microcomputer control to efficiently convert AC input into controlled DC charging power.
- 19% smaller than the GEN2.
- Delivers over 33% more power.
- High-frequency switch-mode technology.
- Microcomputer-controlled charging.
Charging Compatibility
Multiple Battery Chemistries and Types
The GENPRO10X2 supports 12-volt lead-acid and lithium-ion batteries across a wide range of battery types. It can be used with flooded, gel, maintenance-free, AGM, EFB, CA, wet, and lithium batteries found in starter, deep-cycle, marine, and other supported applications.
Battery Management
Automatic Charging, Repair, and Maintenance
Construction
Fully Sealed and Waterproof
The GENPRO10X2 features a fully sealed housing with an IP68 ingress protection rating. It is designed for extreme onboard conditions and has undergone life-cycle testing that includes thousands of hours underwater.
- IP68-rated ingress protection.
- Fully sealed waterproof housing.
- Integrated anti-vibration backing.
- Built for demanding marine environments.
Installation
Flexible Permanent Mounting
A simplified mounting system supports installation in any direction, including upside down. The integrated backing helps isolate shock, vibration, and noise, while the cables resist oil, gas, grease, water, chemicals, UV exposure, and abrasion.
- Installs in any orientation.
- 72-inch DC cables with eyelets.
- 72-inch AC power cable.
- Oil-, chemical-, UV-, and abrasion-resistant cables.
Safety
Integrated Charging Protection
| Model | GENPRO10X2 |
| Battery Banks | 2 |
| Charging Current | 10 Amps DC x 2 Banks |
| Total Charging Output | 20 Amps |
| Battery Voltage | 12 Volts |
| Charging Modes | 12V, 12V AGM, 12V Lithium, 12V Repair |
| Battery Chemistry | Lead-Acid and Lithium |
| Supported Battery Types | AGM, CA, EFB, Gel, Lithium, MF, Wet |
| Capacity Range | Up to 230 Amp-Hours |
| Maintenance | All Battery Sizes |
| Line Voltage | 120V to 240V AC |
| Frequency | 50Hz to 60Hz |
| Power Consumption | 150 Watts x 2 Banks, 300 Watts Max |
| Operating Temperature | -4°F to 104°F (-20°C to 40°C) |
| Storage Temperature | -22°F to 140°F (-30°C to 60°C) |
| Relative Humidity | 0% to 95%, Non-Condensing |
| IP Rating | IP68 |
| Height | 6.5 in (165 mm) |
| Width | 8.15 in (207 mm) |
| Depth | 2.87 in (73 mm) |
| Weight | 8.74 lb (3.96 kg) |
| DC Cable and Eyelet Length | 72 in (182 cm) |
| DC Cable Size | 14 AWG |
| DC Fuse Size | 15 Amp Mini Blade Fuse |
| AC Cable Length | 72 in (182 cm) |
| AC Cable Size | 18 AWG |
| Safety Features | Short-Circuit, Open-Circuit, Overheating, Overcharge, Spark-Proof, Reverse Polarity Protection |
What's in the Box
Included Components
- GENPRO10X2 On-Board Battery Charger
- (2) Self-Tapping Screws
- User Guide
- Warranty Information
The GENPRO10X2 independently charges and maintains two 12-volt battery banks while providing selectable charging modes, temperature-adjusted charging, battery repair, and built-in safety protection.
1x NOCO GBX55 Boost X 12V 1750A Jump Starter (GBX55)
Introducing a new kind of jump starting experience featuring our latest PX Lithium Technology that delivers incredible power, ultra-fast charging, and unmatched versatility. This isn't an upgrade— it's a whole new series. The new Boost X offers more starting power and unleashes maximum power delivery for the most demanding starts. Paired with USB-C Power Delivery technology to recharge insanely fast.
Boost X is now turbo-chargeable. It is equipped with USB-C technology that, combined with power delivery, gives you lightning-fast recharges. Completely recharge the GBX55 in 1.2 hours, or go from 0% to jump starting in just 5-minutes of charge. With Boost X’s 60W USB-C input and output, it is possible to charge up to 5X faster. Use compatible chargers up to 60W to increase your charging speed.
ULTRA-BRIGHT. 200 LUMENS.
More than a jump starter, Boost X is a useful tool for daily use and emergency situations alike. The GBX55 is equipped with a 200-Lumen LED flashlight with various brightness modes, SOS, and emergency strobe— handy to have as a roadside or road trip tool.
Tech Specs
What's In The Box
GBX55 Lithium Jump Starter
Integrated HD Precision Battery Clamps
USB-C to USB-C Cable
Microfiber Storage Bag
Safety & Warranty Information
Starting Current
1750 Amps (Peak)
Battery Types
12 Volt Lead-Acid Batteries
Internal Battery
46 Watt-Hour Lithium-Ion
USB Input
USB-C: 5 Volts 1.5 Amps / 9 Volts 3 Amps / 12 Volts 3 Amps / 15 Volts 3 Amps / 20 Volts 3 Amps
USB Output
USB-A: 5 Volts 2.1 Amps Max / 10 Watts Max
USB-C: 5 Volts 3 Amps / 9 Volts 3 Amps / 12 Volts 3 Amps / 15 Volts 3 Amps / 20 Volts 3 Amps
Gas Engine Rating
Up to 7.5 Liters
Diesel Engine Rating
Up to 4.0 Liters
LED Flashlight
200 Lumens
Product Size
Height: 4.9in (124.5mm)
Width: 7.66in (194.5mm)
Depth: 2.5in (63.5mm)
Weight: 2.58lbs (1.17kg)
IP Rating: IP65 (w/ Ports Closed)
1x NOCO GBC102 GBX55 EVA Protection Case (GBC102)
The lightweight, durable, and rugged GBC102 EVA Protective Case has a semi-rigid custom exterior with zipper closures and a reinforced handle. The rubberized EVA exterior offers protection from moisture, impact, dust, and other environmental factors, while the molded interior perfectly fits, stores, and protects its corresponding NOCO Boost X UltraSafe lithium jump starters— the GBX55 (sold separately).
FOR GBX55 JUMP STARTERS. ALL-IN-ONE STORAGE.
Organize your GBX55 jump starter and included accessories with an all-in-one storage case. Customized to fit the GBX55 UltraSafe Lithium Jump Starter, plus included accessories.
CUSTOMIZED TO FIT GBX55 & ACCESSORIES. MADE FOR BOOST.
Total protection for Boost and accessories with a durable design and secure enclosure. Made with a soft melange velvet linking for a secure, scratch-free fit.
CONVENIENT ZIPPERED POCKET. ACCESSSORY STORAGE.
Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs.
Tech Specs
What's In The Box: GBC102 EVA Protective Case
External Dimensions
Height: 5.31in (135mm)
Width: 10.28in (261mm)
Depth: 4.21in (107mm)
Product Weight: 0.93lbs (0.42kg)
Compatible Boost Models: GBX55