Description
Included in this kit
This bundle includes 2x PowerBass S-84 - 8" Single 4-Ohm Subwoofer, and a PowerBass ASA3-400.1 - 400 Watt x 1 @ 2-Ohm Amplifier.
2x PowerBass S-84 - 8" Single 4-Ohm Subwoofer (S-84)
PowerBass S-84 8" Single 4-Ohm Subwoofer
PowerBass S-Series woofers featuring a 4-layer wool/paper cone now sport a treated non-resonant finished, stamped steel basket that is custom tooled with distinctive X design. A 1.5” BASV voice coil former is used on the 8-inch, and a Large Roll foam surround for precise linear movement of the cone, which equals loud bass. The S Series subwoofers are well-suited for small sealed or ported enclosures and use dual 4-ohm and single 4-ohm voice coils for multiple bass applications. Now more than ever, S-Series woofers provide lots of value without sacrificing hard-hitting performance.
Features -
• 8" Single 4-Ohm Subwoofer
• 125 watt RMS/250 Watts Max
• Proprietary DDC Coated Paper/Wool Cone
• Pressed 4-Layer Large Roll Foam Surround
• 1.5" Vented BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Stamped Steel Basket
• Rubber Mounting Gasket/Trim Ring
• Chrome Push Terminals
• Optimally Designed for Both Small Sealed or Ported Enclosures
Specifications -
• Nominal Impedance: 4-ohm
• BL: 9
• Inputs: Single Coil
• Subwoofer Frequency Range: 41 Hz - 800 Hz
• Voice Coil Size: 1.5"
• Material: Pressed Wool / Paper
• Magnet Size: 116 oz
• Sensitivity (1W / 1M): 86 dB
• Motor Structure: 116 oz Ferrite
• Cutout Diameter: 7 1/8 in
• Mounting Depth: 3.5 in
• Xmax: 7 mm
• Spl: 86 dB
• No: 0.24%
• Qts: 0.43
• Qes: 0.467
• Qms: 4.85
• Mms: 49.6 g
• Cms: 317 uM/N
• Vas: 19 Ltr
• SD: 206.12 sqCM
• Fs: 41 Hz
• Test Impedance: 3.2-ohms
• VC Impedance: 4-ohm
• Size: 8"
• Sensitivity: 86 dB
• Frequency Response: 41 Hz - 800 Hz
• Voice Coil Size: 1.5 in
• Power Handling (RMS/Peak): 125 / 250 watts
1x PowerBass ASA3-400.1 - 400 Watt x 1 @ 2-Ohm Amplifier (ASA3-400.1)
PowerBass ASA3-400.1 400W RMS @ 2Ω MONO BLOCK CLASS A/B AMPLIFIER
PowerBass's A/B Class mono block amplifiers combine our new clean low profile design that still has all the necessary features built into an economical package that puts power and control at your command. Features like a MOSFET power supply, RCA pre-amp out, and variable LPF electronic crossover make these ideally suited to add some punch to any system.
The ASA3-400.1 mono subwoofer amp is a great choice when you're looking to pound out the bass. With 400 watts, there’s plenty of juice on tap to power our S or M Series single 4-ohm woofers.
Features -
• 400 Watt High Efficiency Class A/B Design
• 2-OHM Stable Mono Block Amplifier
• PWM MOSFET Power Supply
• Low Level RCA Input/Low Level RCA Pass Through Output
• Remote Soft Delay Turn On/Off Circuit
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ
• Variable Gain Control
• Wired Secondary Remote Gain Control Included
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
• Switchable Logo Back Lighting
Specifications -
• Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz
• Inputs: RCA Input/RCA Pass-Through Output
• Equalization Boost/Cut: 0 - 18 dB @ 45 Hz
• Power Supply: Unregulated PWM
• 4-ohm Power: 200 watts x 1
• 2-ohm Power: 400 watts x 1
• Subwoofer EQ Frequency: 45 Hz
• Variable Subwoofer EQ: 0 - 18 dB
• Low-Pass Crossover Freq: 40 Hz - 250 Hz
• Peak Power: 800 watts
• Crossover Slope: 12 dB
• Dimensions (in Inches): 13.7" x 8.3" x 2.3"
• Input Sensitivity: 0.25 V - 6.0 V
• S/N Ratio: >94 dB
• Output Power (14.4 V) @ 4 ohm: 200 watts x 1
• Output Power (14.4 V) @ 2 ohm: 400 watts x 1
• Channels (mono): 1
• Frequency Response: 20 Hz - 22 kHz