Description
The Punch Pro V2 PPROV2-BT is a 4-Ohm titanium dome “Bullet” tweeter purpose-built for high SPL (Sound Pressure Level) systems. Designed for high output in a compact form, it incorporates a composite basket, dual mounting bezels, and a CCAW titanium dome diaphragm for efficient, responsive performance. Sold in pairs (2 each).
Features:
Aggressive Output. Rugged Reliability.
DDesigned for extreme SPL performance in tight mounting locations
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Titanium alloy diaphragm for thermal stability under demanding SPL conditions
Injection molded PA66 reinforced 15% glass fiber frame minimizes resonance
1” Ultra-low mass edge driven CCAW voice coil with Nomex® former
Overhung voice coil for consistent magnetic field if overdriven
High grade N48SH neodymium motor located inside voice coil for high sensitivity
Easy mount tweeter with twist-on screw backer for secure installations
Inline mounted 6dB/octave 100V high-pass crossover
Includes mounting hardware
Includes cut-out template
Specifications:
Speaker Type: Bullet Tweeter
Speaker Size (Nominal Diameter): 1" (25.4 mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3kHz - 23kHz
Fs (Hz): 3.6 kHz
Sensitivity (dB @ 1W/1M): 102 dB
Sensitivity (dB @ 2.83V/1M): 105 dB
Voice Coil Diameter (in/mm): 1" (25.4 mm)
Power Handling (Watts RMS): 75 Watts RMS/150 Watts Peak
Crossover (Hz): 12kHz High-Pass
Crossover Slope (dB): 6dB/octave
Mounting Depth: 1.5" (38 mm)
Mounting Flange: 2.76" (70 mm)
Cutout Diameter: 1.9" (48.25 mm)
Front Clearance: 0.46" (11.8 mm)
Grille/Trim Ring Included: No
Removable Motor Cover: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1" Tweeters
(8) #8 Hex Screws, 25 mm long
(1) 3 mm Hex Bit
(1) Tweeter Cutout Template
Shipping Weight: 1.4 Lbs. (0.64 Kg.)
Features:
Aggressive Output. Rugged Reliability.
DDesigned for extreme SPL performance in tight mounting locations
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Titanium alloy diaphragm for thermal stability under demanding SPL conditions
Injection molded PA66 reinforced 15% glass fiber frame minimizes resonance
1” Ultra-low mass edge driven CCAW voice coil with Nomex® former
Overhung voice coil for consistent magnetic field if overdriven
High grade N48SH neodymium motor located inside voice coil for high sensitivity
Easy mount tweeter with twist-on screw backer for secure installations
Inline mounted 6dB/octave 100V high-pass crossover
Includes mounting hardware
Includes cut-out template
Specifications:
Speaker Type: Bullet Tweeter
Speaker Size (Nominal Diameter): 1" (25.4 mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3kHz - 23kHz
Fs (Hz): 3.6 kHz
Sensitivity (dB @ 1W/1M): 102 dB
Sensitivity (dB @ 2.83V/1M): 105 dB
Voice Coil Diameter (in/mm): 1" (25.4 mm)
Power Handling (Watts RMS): 75 Watts RMS/150 Watts Peak
Crossover (Hz): 12kHz High-Pass
Crossover Slope (dB): 6dB/octave
Mounting Depth: 1.5" (38 mm)
Mounting Flange: 2.76" (70 mm)
Cutout Diameter: 1.9" (48.25 mm)
Front Clearance: 0.46" (11.8 mm)
Grille/Trim Ring Included: No
Removable Motor Cover: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1" Tweeters
(8) #8 Hex Screws, 25 mm long
(1) 3 mm Hex Bit
(1) Tweeter Cutout Template
Shipping Weight: 1.4 Lbs. (0.64 Kg.)