Description
The Punch Pro V2 PPROV2-T is a 4-Ohm aluminum dome tweeter purpose-built for high SPL (Sound Pressure Level) systems. Its oversized design incorporates a CNC-machined aluminum phase plug engineered for maximum heat dissipation. The tweeter uses an aluminum dome diaphragm, while the midrange utilizes a lightweight curvilinear pressed pulp cone for responsive output. Sold in pairs (2 each).
Features:
Aggressive Output. Rugged Reliability.
Designed for extreme SPL performance and maximum output
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Aluminum alloy diaphragm for precision and smooth transient response
Cast aluminum tweeter frame for unmatched rigidity and thermal efficiency
1.5” Ultra-low mass edge driven CCAW voice coil with Kapton® former
Underhung voice coil for consistent magnetic flux and linear motion
Nickel plated push pins for effortless wire insertion/removal
High grade Y30 ceramic ferrite motor for high BL (motor strength)
Internal concealed 6dB/octave 100V high-pass crossover
Includes mounting hardware
Includes cut-out template
Specifications:
Speaker Type: Tweeter
Speaker Size (Nominal Diameter): 1.5" (38.1 mm)
Nominal Impedance (Ohms: )4Ω
Frequency Response (Hz): 3kHz - 22kHz
Fs (Hz): 3 kHz
Sensitivity (dB @ 1W/1M): 105 dB
Sensitivity (dB @ 2.83V/1M): 108 dB
Voice Coil Diameter (in/mm): 1.5" (38 mm)
Power Handling (Watts RMS): 75 Watts RMS/150 Watts Peak
Crossover Hz: 12kHz High-Pass
Crossover Slope (dB): 6dB/Octave
Mounting Depth (Front Load): 2.61" (66.35 mm)
Mounting Flange: 5.28" (134 mm)
Cutout Diameter: 4.35" (110.5 mm)
Front Clearance: 0.75" (19 mm)
Removable Motor Cover: No
Grille/Trim Ring Included: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1.5" Tweeters
(8) #8 Hex Screws, 25 mm long
(1) 3 mm Hex Bit
(1) Tweeter Cutout Template
Shipping Weight: 7.8 Lbs. (3.54 Kg.)
Features:
Aggressive Output. Rugged Reliability.
Designed for extreme SPL performance and maximum output
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Aluminum alloy diaphragm for precision and smooth transient response
Cast aluminum tweeter frame for unmatched rigidity and thermal efficiency
1.5” Ultra-low mass edge driven CCAW voice coil with Kapton® former
Underhung voice coil for consistent magnetic flux and linear motion
Nickel plated push pins for effortless wire insertion/removal
High grade Y30 ceramic ferrite motor for high BL (motor strength)
Internal concealed 6dB/octave 100V high-pass crossover
Includes mounting hardware
Includes cut-out template
Specifications:
Speaker Type: Tweeter
Speaker Size (Nominal Diameter): 1.5" (38.1 mm)
Nominal Impedance (Ohms: )4Ω
Frequency Response (Hz): 3kHz - 22kHz
Fs (Hz): 3 kHz
Sensitivity (dB @ 1W/1M): 105 dB
Sensitivity (dB @ 2.83V/1M): 108 dB
Voice Coil Diameter (in/mm): 1.5" (38 mm)
Power Handling (Watts RMS): 75 Watts RMS/150 Watts Peak
Crossover Hz: 12kHz High-Pass
Crossover Slope (dB): 6dB/Octave
Mounting Depth (Front Load): 2.61" (66.35 mm)
Mounting Flange: 5.28" (134 mm)
Cutout Diameter: 4.35" (110.5 mm)
Front Clearance: 0.75" (19 mm)
Removable Motor Cover: No
Grille/Trim Ring Included: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1.5" Tweeters
(8) #8 Hex Screws, 25 mm long
(1) 3 mm Hex Bit
(1) Tweeter Cutout Template
Shipping Weight: 7.8 Lbs. (3.54 Kg.)