Description
Memphis Audio PRX10FTV 10-Inch Car Subwoofer
The Memphis Audio PRX10FTV is a 10-inch Power Reference car subwoofer rated for 500 watts RMS and 1000 watts peak. Tri-FLEX technology gives you selectable 1-, 2- or 4-ohm impedance, making it easy to match the woofer to your subwoofer amplifier.
Tri-FLEX keeps your amp options open
Choosing a subwoofer usually means settling on an impedance before the system is finished. The PRX10FTV gives you three settings in one woofer. Its Tri-FLEX jumper plug selects 1, 2 or 4 ohms, making it easier to work with your current sub amp and revisit the setting if the system changes.
The selectable load is useful for a future two-subwoofer build, too. Reconfigure the woofer and plan the wiring around the final load your amplifier supports.
Cooling where the heat starts
DVVC stands for Direct Voice Coil Cooling. Memphis places the venting directly below the voice coil, allowing cone movement to help exhaust trapped heat. The polypropylene cone, stitched butyl rubber surround and reinforced spider complete the moving assembly.
Measure the enclosure before you buy
Allow 5.1 inches of mounting depth and a 9.2-inch cutout for this 10-inch subwoofer. Use the enclosure recommendations below to compare sealed and ported box options, and check the complete installation for clearance.
| Brand | Memphis Audio |
| Series | Power Reference |
| Model | PRX10FTV |
| Nominal size | 10 inches |
| Power handling | 500W RMS / 1000W peak |
| Impedance | 1, 2 or 4 ohms selectable |
| Technology | Tri-FLEX |
| Mounting depth | 5.1 inches |
| Cutout diameter | 9.2 inches |
| Voice coil diameter | 2 inches |
| Magnet weight | 63 oz |
| Product type | Car subwoofer |
| Cooling | DVVC Direct Voice Coil Cooling |
| Cone | Black polypropylene |
| Surround | Stitched butyl rubber |
| Spider | Reinforced |
| Leads | Woven tinsel leads |
PRX10FTV recommended enclosures
| Single-sub sealed volume | 0.75 ft³ gross |
| Dual-sub sealed volume | 1.5 ft³ gross |
| Single-sub vented volume | 1.45 ft³ net |
| Single-sub vented port | 12" x 1.75" x 21" long |
| Single-sub vented tuning | 37 Hz |
| Dual-sub vented volume | 2 ft³ net |
| Dual-sub vented port | 12" x 3" x 26" long |
| Dual-sub vented tuning | 37 Hz |
| Single-sub sealed volume | 1 ft³ gross |
| Dual-sub sealed volume | 2 ft³ gross |
| Single-sub vented volume | 1.7 ft³ net |
| Single-sub vented port | 12.5" x 1.75" x 20" long |
| Single-sub vented tuning | 35 Hz |
| Dual-sub vented volume | 2.55 ft³ net |
| Dual-sub vented port | 13" x 3" x 26" long |
| Dual-sub vented tuning | 35 Hz |
| Single-sub sealed volume | 1.25 ft³ gross |
| Dual-sub sealed volume | 2.5 ft³ gross |
| Single-sub vented volume | 1.9 ft³ net |
| Single-sub vented port | 12.5" x 2" x 23" long |
| Single-sub vented tuning | 33 Hz |
| Dual-sub vented volume | 3.33 ft³ net |
| Dual-sub vented port | 14.5" x 3.25" x 26" long |
| Dual-sub vented tuning | 33 Hz |
Questions about the PRX10FTV
What does Tri-FLEX do on the PRX10FTV?
Tri-FLEX lets you select a 1-, 2- or 4-ohm impedance by repositioning the jumper plug. It changes the subwoofer's load to help match your amplifier.
How much power does this 10-inch subwoofer handle?
The PRX10FTV is rated for 500 watts RMS and 1000 watts peak power handling.
Can I change the setup when I add another sub?
Yes. The selectable impedance lets you reconfigure the original woofer. Check the final wired load against your amplifier's supported impedance when adding a second subwoofer.