Description
Memphis Audio PRX12FTV 12-Inch Car Subwoofer
The Memphis Audio PRX12FTV is a 12-inch Power Reference car subwoofer with 500 watts RMS and 1000 watts peak power handling. Its Tri-FLEX selectable impedance lets you configure the woofer for a 1-, 2- or 4-ohm load using the FLEX jumper plug.
A 12-inch sub that works with your system plans
The PRX12FTV handles 500 watts RMS and 1000 watts peak. Its Tri-FLEX terminal lets you select a 1-, 2- or 4-ohm load with a jumper plug, so amplifier matching starts with a choice rather than a fixed impedance.
Changing your amp later does not have to mean starting over with another impedance version of the woofer. Revisit the FLEX setting and plan the final system load around the new amplifier.
Power Reference construction
The black polypropylene cone is paired with a stitched butyl rubber surround and reinforced spider. DVVC Direct Voice Coil Cooling puts venting near the coil to help remove heat as the woofer plays. A 2-inch voice coil completes the design.
Build the right box around it
The mounting depth is 5.5 inches, and the required cutout is 11 inches. Compare the sealed and ported enclosure recommendations below when choosing the box for your installation.
| Brand | Memphis Audio |
| Series | Power Reference |
| Model | PRX12FTV |
| Nominal size | 12 inches |
| Power handling | 500W RMS / 1000W peak |
| Impedance | 1, 2 or 4 ohms selectable |
| Technology | Tri-FLEX |
| Mounting depth | 5.5 inches |
| Cutout diameter | 11 inches |
| Voice coil diameter | 2 inches |
| Magnet weight | 63 oz |
| Product type | Car subwoofer |
| Cooling | DVVC Direct Voice Coil Cooling |
| Cone | Black polypropylene |
| Surround | Stitched butyl rubber |
| Spider | Reinforced |
| Leads | Woven tinsel leads |
PRX12FTV recommended enclosures
| Single-sub sealed volume | 1 ft³ gross |
| Dual-sub sealed volume | 2 ft³ gross |
| Single-sub vented volume | 1.8 ft³ net |
| Single-sub vented port | 12.5" x 1.75" x 21" long |
| Single-sub vented tuning | 36 Hz |
| Dual-sub vented volume | 2.4 ft³ net |
| Dual-sub vented port | 13" x 3" x 26" long |
| Dual-sub vented tuning | 36 Hz |
| Single-sub sealed volume | 1.25 ft³ gross |
| Dual-sub sealed volume | 2.5 ft³ gross |
| Single-sub vented volume | 2.25 ft³ net |
| Single-sub vented port | 14" x 1.875" x 21" long |
| Single-sub vented tuning | 34 Hz |
| Dual-sub vented volume | 2.9 ft³ net |
| Dual-sub vented port | 13.5" x 3" x 26" long |
| Dual-sub vented tuning | 34 Hz |
| Single-sub sealed volume | 1.5 ft³ gross |
| Dual-sub sealed volume | 3 ft³ gross |
| Single-sub vented volume | 2.65 ft³ net |
| Single-sub vented port | 14" x 2" x 23" long |
| Single-sub vented tuning | 32 Hz |
| Dual-sub vented volume | 3.6 ft³ net |
| Dual-sub vented port | 14.5" x 3.25" x 26" long |
| Dual-sub vented tuning | 32 Hz |
Questions about the PRX12FTV
Is the PRX12FTV a 1-, 2- or 4-ohm subwoofer?
It can be configured for any one of those three loads. Tri-FLEX selectable impedance uses a jumper plug to choose 1, 2 or 4 ohms.
What are its RMS and peak power ratings?
The Memphis Audio PRX12FTV handles 500 watts RMS and 1000 watts peak.
What size mounting hole does it need?
Use an 11-inch cutout and allow 5.5 inches of mounting depth for the subwoofer.