Description
Memphis Audio PRXL12FTV 12-Inch RGB LED Car Subwoofer
The Memphis Audio PRXL12FTV is a 12-inch Power Reference RGB LED car subwoofer rated for 500 watts RMS and 1000 watts peak. Its integrated RGB LED cone ring adds illumination to the bass installation, and Tri-FLEX technology provides selectable 1-, 2- or 4-ohm impedance.
Give the bass system a finished look
The RGB LED ring follows the edge of the PRXL12FTV's cone, adding color directly at the woofer. It is a natural fit for an enclosure you want to show off in the trunk or cargo area.
Behind the lighting, this is a 12-inch Power Reference subwoofer rated for 500 watts RMS and 1000 watts peak. A 2-inch voice coil and DVVC Direct Voice Coil Cooling address the demands of an amplified bass system.
FLEX for the amp you have and the next one
Tri-FLEX technology gives the PRXL12FTV selectable 1-, 2- or 4-ohm impedance. Reposition the jumper plug to choose the load for your sub amp. If the build grows or the amplifier changes, the woofer can be reconfigured instead of locking you into one impedance choice.
Wire the lighting as part of the installation
Connect the LEDs to a hardwired 12V source or use the Memphis MXRGBBTC RGB controller, sold separately. Plan that connection before finishing the enclosure and trim.
The subwoofer has a 5.5-inch mounting depth and an 11-inch cutout. The enclosure tables below provide sealed and ported box recommendations for this model.
| Brand | Memphis Audio |
| Series | Power Reference |
| Model | PRXL12FTV |
| Nominal size | 12 inches |
| Power handling | 500W RMS / 1000W peak |
| Impedance | 1, 2 or 4 ohms selectable |
| Technology | Tri-FLEX |
| Mounting depth | 5.5 inches |
| Cutout diameter | 11 inches |
| Voice coil diameter | 2 inches |
| Magnet weight | 63 oz |
| Sensitivity | 85.6 dB @ 1 ohm / 85.5 dB @ 2 ohms / 86 dB @ 4 ohms |
| Product type | Car subwoofer |
| Cooling | DVVC Direct Voice Coil Cooling |
| Lighting | Integrated RGB LED cone accent ring |
| Cone | Black polypropylene |
| Surround | Stitched butyl rubber |
| Spider | Reinforced |
| Leads | Woven tinsel leads |
PRXL12FTV recommended enclosures
| Single-sub sealed volume | 1 ft³ gross |
| Dual-sub sealed volume | 2 ft³ gross |
| Single-sub vented volume | 1.8 ft³ net |
| Single-sub vented port | 12.5" x 1.75" x 21" long |
| Single-sub vented tuning | 36 Hz |
| Dual-sub vented volume | 2.4 ft³ net |
| Dual-sub vented port | 13" x 3" x 26" long |
| Dual-sub vented tuning | 36 Hz |
| Single-sub sealed volume | 1.25 ft³ gross |
| Dual-sub sealed volume | 2.5 ft³ gross |
| Single-sub vented volume | 2.25 ft³ net |
| Single-sub vented port | 14" x 1.875" x 21" long |
| Single-sub vented tuning | 34 Hz |
| Dual-sub vented volume | 2.9 ft³ net |
| Dual-sub vented port | 13.5" x 3" x 26" long |
| Dual-sub vented tuning | 34 Hz |
| Single-sub sealed volume | 1.5 ft³ gross |
| Dual-sub sealed volume | 3 ft³ gross |
| Single-sub vented volume | 2.65 ft³ net |
| Single-sub vented port | 14" x 2" x 23" long |
| Single-sub vented tuning | 32 Hz |
| Dual-sub vented volume | 3.6 ft³ net |
| Dual-sub vented port | 14.5" x 3.25" x 26" long |
| Dual-sub vented tuning | 32 Hz |
Questions about the PRXL12FTV
Is an RGB controller required?
The LEDs can be hardwired to a 12V source. The Memphis MXRGBBTC RGB controller is another option and is sold separately.
Which impedance settings does the PRXL12FTV offer?
Its Tri-FLEX jumper plug selects a 1-, 2- or 4-ohm load for amplifier matching.
How much power does the 12-inch LED model handle?
The PRXL12FTV is rated for 500 watts RMS and 1000 watts peak power handling.