Description
The REVO12-XXX is the one of the only SPL marine woofer in the world.
Advanced acoustical engineering and high end components make the REVO12-XXX the subwoofer of choice for those looking for extreme bass.
Cutting edge computer aided design and full finite element analysis give you a woofer built for extreme use.
Weighing in at over 30 pounds! With the REVO12-XXX, not only do you get killer bass but also some additional ballast! Powder Coated gloss black cast aluminum frame, high stiffness matte black polypropylene/carbon fiber/glass fiber cone, heavy duty magnetic system, high roll thermoformed rubber surround, fiberglass former, 4" dual voice coil, gold plated screw down binding posts, integrated multi part cooling system with t-yoke heat sink and combination peripheral/pole piece venting ensures high power and low voice coil temperatures.
Specifications -
Impedance: Dual 2 ohms
Resistance: 1.0 Ohm
Sd: 510.7 cm2
Xmax: 11 mm
Mms: 242 g
Voice Coil Size: 4.0 inches
Fs - 40 Hz
Vas - 24 Liters
Qms - 5.00
Qes - 0.42
Qts - 0.39
Bl (T*m) - 11.9
Le (mH) - 0.5
SPL - 89 dB
RMS Power - 1200W
Peak Power - 2400W
Size & Weight
Box Specifications: Optimized for 1.2 cu ft sealed enclosure or 1.8 cu ft ported enclosure.
(Optimum: Tuned at 41 Hz)
Weight: 33.4 lbs (15.14kg)
Diameter: 12.4 inches (314.96mm)
Mounting Depth: 6.53 inches (165.86mm)
Hole Cut Out: 11.26 inches (286.00mm)
Advanced acoustical engineering and high end components make the REVO12-XXX the subwoofer of choice for those looking for extreme bass.
Cutting edge computer aided design and full finite element analysis give you a woofer built for extreme use.
Weighing in at over 30 pounds! With the REVO12-XXX, not only do you get killer bass but also some additional ballast! Powder Coated gloss black cast aluminum frame, high stiffness matte black polypropylene/carbon fiber/glass fiber cone, heavy duty magnetic system, high roll thermoformed rubber surround, fiberglass former, 4" dual voice coil, gold plated screw down binding posts, integrated multi part cooling system with t-yoke heat sink and combination peripheral/pole piece venting ensures high power and low voice coil temperatures.
Specifications -
Impedance: Dual 2 ohms
Resistance: 1.0 Ohm
Sd: 510.7 cm2
Xmax: 11 mm
Mms: 242 g
Voice Coil Size: 4.0 inches
Fs - 40 Hz
Vas - 24 Liters
Qms - 5.00
Qes - 0.42
Qts - 0.39
Bl (T*m) - 11.9
Le (mH) - 0.5
SPL - 89 dB
RMS Power - 1200W
Peak Power - 2400W
Size & Weight
Box Specifications: Optimized for 1.2 cu ft sealed enclosure or 1.8 cu ft ported enclosure.
(Optimum: Tuned at 41 Hz)
Weight: 33.4 lbs (15.14kg)
Diameter: 12.4 inches (314.96mm)
Mounting Depth: 6.53 inches (165.86mm)
Hole Cut Out: 11.26 inches (286.00mm)
Refurbished FAQ
Refurbished Frequently Asked Questions
- What does refurbished mean? Refurbished products may be unused customer returns that are essentially "new" items, or they may be defective products that were returned under warranty, and resold by the manufacturer after repairing the defects and ensuring proper function.
- What is the warranty? All of our manufacturer refurbished items come with a 90-day warranty. Compared to the new products we carry generally having a 1-year or longer warranty. (JL Audio Amps are 2-years, and all of Wet Sounds carries a 2-year warranty when new)
- What's it look like? A lot of the manufacturer refurbished products we sell generally look very good, and sometimes you can't even tell. However, these products can have some wear and tare on them, and we generally rate them an 8/10 cosmetically, and perfect 10/10 functionally.
- What was wrong with it? We aren't told what is wrong with each and every product. Like stated above, they could have just been a return or they may have had an issue. Regardless, they are all combed over by their respective manufacturer to function as new before being shipped to us.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.
