Description
Included in this kit
This bundle includes a Rockford Fosgate P3-2X12 Dual 12" Ported Loaded Enclosure, 1200 Watts Rms, - 1-Ohm Final, H 15.12” X W 33.9” X D 16.4”, a Rockford Fosgate R2-1200X1 Mono Amplifier- 400x1 @ 4-Ohm, 800x1 @ 2-Ohm, 1200x1 @ 1-Ohm, and a Rockford Fosgate RFK1 Power Only Amp Kit: 17ft 1/0awg Power Wire, 3ft 1/0awg Ground Wire, 20ft Remote Wire, Anl/Maxi Fuse Holder, - 300 Amp Fuse.
1x Rockford Fosgate P3-2X12 Dual 12" Ported Loaded Enclosure, 1200 Watts Rms, - 1-Ohm Final, H 15.12” X W 33.9” X D 16.4” (P3-2X12)
Rockford Fosgate Punch Dual P3 12" Loaded Enclosure
The P3-2X12 is a dual P3 12” vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P3 Loaded Enclosures feature similar tonal performance as P2 & P1 models, but with higher power handling capacity.
- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- High current binding posts
- 1 Year Warranty
Specifications
Woofer Quantity
2
Woofer Size
12"
Woofer Series
Punch P3 (P3D4-12)
Nominal Impedance (ea)
1-Ohm
Internally wired to create a 1-Ohm amplifier load
Internally wired to create a 1-Ohm amplifier load
Power Handling (Watts RMS)
1200 Watts RMS
2400 Watts Max
2400 Watts Max
Enclosure Type
Vented
Enclosure Material
5/8" MDF (Medium Density Fiberboard)
Speaker Connector
Up to 10 AWG compression terminals
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
Box (H x W x D)
Wedge (H x W x D1 x D2)
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
Box (H x W x D)
Wedge (H x W x D1 x D2)
15.125" x 33.875" x 15.75"
(38.4cm x 86cm x 40cm)
(38.4cm x 86cm x 40cm)
Shipping Weight
89.65 Lbs. (40.66 kg)
CEA-2031 Compliant
1x Rockford Fosgate R2-1200X1 Mono Amplifier- 400x1 @ 4-Ohm, 800x1 @ 2-Ohm, 1200x1 @ 1-Ohm (R2-1200X1)
Rockford Fosgate Prime 1200 Watt Mono Amplifier
Primed for Performance, the R2-1200X1 is a 1200 watt, class-D amplifier, capable of operating at 4Ω, 2Ω or 1Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
The R2 models are developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.
- Balanced Differential Inputs with RCA Pass Through Outputs
- High Level Input Capable
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Features C.L.E.A.N. Set-up
- Variable Input Gain adjustment level
- Includes RLC Remote Level Control
- Variable Infrasonic Filter
- Continuously Variable On Board Punch EQ
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Cast aluminum heat sink
- Class-D Topology
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- 1 Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating400W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
1200 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
400 Watts x 1 @ 4Ω
800 Watts x 1 @ 2Ω
1200 Watts x 1 @ 1Ω
800 Watts x 1 @ 2Ω
1200 Watts x 1 @ 1Ω
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
489 Watts x 1 @ 4Ω
889 Watts x 1 @ 2Ω
1389 Watts x 1 @ 1Ω
889 Watts x 1 @ 2Ω
1389 Watts x 1 @ 1Ω
Bridgeable
No
Frequency Response
20 Hz - 250 Hz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-D
Efficiency (average)
> 80%
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
Remote Controls
Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out
C.L.E.A.N. In
C.L.E.A.N. Out
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
200 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
121 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.9" x 6.8" x 11.3"
(4.9 cm x 17.3 cm x 28.5 cm)
(4.9 cm x 17.3 cm x 28.5 cm)
Shipping Weight
1x Rockford Fosgate RFK1 Power Only Amp Kit: 17ft 1/0awg Power Wire, 3ft 1/0awg Ground Wire, 20ft Remote Wire, Anl/Maxi Fuse Holder, - 300 Amp Fuse (RFK1)
Rockford Fosgate 1/0 Power Installation Kit
1/0 gauge power and ground installation kit for an amplifier.
Kit includes 17 feet of 1/0 AWG power wire, 3 feet of ground wire, ANL/Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 1/0 AWG (53.5mm²) 4,704 strands
- 1 Year WarrantyFULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 1/0 AWG (53.5mm²) 4,704 strands
- 1 Year Warranty
Specifications
Battery PWR/GND Gauge
1/0 AWG
Amplifier PWR/GND Gauge
1/0 AWG
Fuse Size
300 Amp
Dual Amp Installation Kit
No
Speaker Wire Gauge
N/A
Fuse Type
ANL