Description
Included in this kit
This bundle includes a Rockford Fosgate P1V2-65 Punch P1 6.5” 3-Way Coaxial Speaker, a Rockford Fosgate P1V2-69 Punch P1 6"x8” 3-Way Coaxial Speaker, a Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak, a Rockford Fosgate T1000X5AD 5 Channel Amplifier 100x4 + 400x1 @ 4-Ohm,- 100x4 + 600x1 @ 2-Ohm, Na + 600x1 @ 1-Ohm, and a Rockford Fosgate RFK1 Power Only Amp Kit: 17ft 1/0awg Power Wire, 3ft 1/0awg Ground Wire, 20ft Remote Wire, Anl/Maxi Fuse Holder, - 300 Amp Fuse.
1x Rockford Fosgate P1V2-65 Punch P1 6.5” 3-Way Coaxial Speaker (P1V2-65)
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 6.5" Speakers
• Installation Hardware
Specifications:
Speaker Type: Coaxial
Midrange Size (Nominal Diameter): 6.5"
Tweeter Size (Nominal Diameter): 3/4” (19 mm) Inverted Dome
Piezo Size (Nominal Diameter): 3/8” (9 mm) Co-Witnessed Convex
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 49Hz - 25kHz
Voice Coil Diameter (in/mm): 1" (25.4 mm)
CrossoverTweeter High-Pass: 9kHz @ 6 dB/Octave
Fs (Hz): 65 Hz
Power Handling (Watts RMS): 75 Watts RMS 150 Watts Peak
Sensitivity (2.83V/1M): 91 dB
Sensitivity (dB @ 1W/1M): 88 dB
Cutout Diameter: 5.42" (137.6 mm)
Mounting Depth (Standard Flange): 2.5" (63.5 mm)
Min. Mounting Depth No Motor Cover: 2.26" (57.3 mm)
Front Side Clearance: 0.43" (11 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box
(2) 6.50” 4Ω 3-Way Coaxial Speakers
(1) 6.50” Speaker Cutout Template
(8) Self-Tapping Phillips #8x32mm (Speaker)
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(4) 18 AWG Crimp Butt Connectors
Mounting Hardware: Yes
1x Rockford Fosgate P1V2-69 Punch P1 6"x8” 3-Way Coaxial Speaker (P1V2-69)
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 6"x9" Speakers
• Installation Hardware
Specifications:
Speaker Type: Coaxial
Midrange Size (Nominal Diameter): 6"x9"
Tweeter Size (Nominal Diameter): 3/4” (19 mm) Inverted Dome
Piezo Size (Nominal Diameter): 3/8” (9 mm) Co-Witnessed Convex
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 45Hz - 25kHz
Voice Coil Diameter (in/mm): 1" (25.4 mm)
CrossoverTweeter High-Pass: 9kHz @ 6 dB/Octave
Power Handling (Watts RMS): 75 Watts RMS 150 Watts Peak
Fs: 60 Hz
Sensitivity (dB @ 1W/1M): 89 dB
Sensitivity (2.83V/1M): 92 dB
Cutout Diameter: 8.4" x 5.71" (213.5 mm x 145 mm)
Mounting Depth (Standard Flange): 3.13" (79.4 mm)
Min. Mounting Depth (No Motor Cover): 3.13" (70 mm)
Front Side Clearance: 0.42" (10.6 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box:
(2) 6”x9” 4Ω 3-Way Coaxial Speakers
(1) 6”x9” Speaker Cutout Template
(8) Self-Tapping Phillips #8x32mm (Speaker)
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(4) 18 AWG Crimp Butt Connectors
Mounting Hardware: Yes
1x Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak (P2D4-12)
Rockford Fosgate Punch 12" P2 4-Ohm DVC Subwoofer
The Rockford Fosgate P2 12” subwoofer continues “The PUNCH” tradition. The P2D4-12 features a Dual 4-Ohm voice coil, 400 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.
Rockford Fosgate has always been known as "The PUNCH" and the P2 12 inch car subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area of your sub up to 25%. The P2 Punch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.
- Dual linear spider with embedded 16 AWG tinsel leads
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Protective PVC textured magnet cover
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Diamond cut cast aluminum trim ring with optional grille
- 1 Year Warranty
Specifications
Size
12"
Power Handling (Watts RMS)
400 Watts RMS
800 Watts Max
800 Watts Max
Speaker Connector
Dual 10 AWG compression
Shipping Weight
15.6 Lbs. (7.07 kg)
CEA-2031 Compliant
Qes
0.59
Qms
6.30
Cutout Diameter
11.22 in. (285 mm)
Re (Ohms)
6.40
Nominal Impedance
Dual 4-Ohm
Voice Coil Diameter
2.25" (57.15 mm)
Mounting Depth
6.40 in. (162 mm)
SPL (dB @ 1w/1m)
86
Fs (Hz)
27.2
Qts
0.54
Vas (Liters)
81.5
Xmax (mm)
13.3
Woofer Displacement
0.085 cu. ft. (2.4 Liters)
Le (mH)
5.5
Magnet Weight (oz)
72.8 oz. (2.06 kg.)
Sd (cm2)
570
Subwoofer Type
Standard
Voice Coil Type
Dual Voice Coil
Sealed Box Volume (Vb)
1.02 cu. ft. (28.8 Liters)
Vented Box Volume (Vb)
1.79 cu. ft. (50.6 Liters)
1x Rockford Fosgate T1000X5AD 5 Channel Amplifier 100x4 + 400x1 @ 4-Ohm,- 100x4 + 600x1 @ 2-Ohm, Na + 600x1 @ 1-Ohm (T1000X5AD)
Rockford Fosgate Power 1,000 Watt Class-ad 5-Channel Amplifier
The Power T1000x5ad is an compact, Class ad 1000 Watt multi-channel amplifier. It features differential inputs with high-level auto turn-on, CLEAN circuit with input/output clip detection, top mounted controls and dual fan forced induction cooling. Additionally, it has our patented Punch EQ circuit built in and Differential inputs with auto turn-on capabilities making it perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs.
The T1000X5ad Element Ready multi-channel amplifier is a 1000 watt RMS unit built on our proprietary Class ad platform designed to deliver unprecedented sound quality with superior power efficiency. Combined with our Constant Power technology, this amplifier can easily exceed its rated power by up to 25% additional output per channel.
Amplifier top mounted controls include our C.L.E.A.N. level setting system, integrated high/ low pass crossovers, Input channel configuration switches and our Punch EQ boost circuit. Upgraded input RCA connectors allow for high or low level input signals to be used through our differential input circuit which eliminates incoming noise and can provide a remote out signal when using high level inputs.
Dual fan cooling, real time thermal monitoring and dual extruded heat sinks maintain heat dissipation even at high outputs keeping the amp cool. The Amplifier is also compatible with our PLC2 level remote control allowing remote output level control of the sub channel.
- Class-BD
- Rockford Fosgate proprietary Class AD technology
- Differential inputs with high level auto turn-on feature
- 4/2 Ohm muti-impedance Constant Power
- Remote-Out feature when using high level inputs
- 2013 PLC2 remote ready
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Top mounted controls
- Dual fan cooled
- Real time thermal sensing with Rollback technology
- Dual extruded heat sinks
- All other normal Rockford protection schemes
- CEA-2006 and CE compliant
- Discrete surface mount technology
- 2-Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating100W x 4 + 400W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
5
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
1000 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
100 Watts x 4 + 400 Watts x 1 @ 4Ω
100 Watts x 4 + 600 Watts x 1 @ 2Ω
N/A + 600 Watts x 1 @ 1Ω
200 Watts x 2 @ 4Ω Bridged + N/A
100 Watts x 4 + 600 Watts x 1 @ 2Ω
N/A + 600 Watts x 1 @ 1Ω
200 Watts x 2 @ 4Ω Bridged + N/A
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
138 Watts x 4 + 487 Watts x 1 @ 4Ω
118 Watts x 4 + 748 Watts x 1 @ 2Ω
N/A + 663 Watts x 1 @ 1Ω
225 Watts x 2 @ 4Ω Bridged + N/A
118 Watts x 4 + 748 Watts x 1 @ 2Ω
N/A + 663 Watts x 1 @ 1Ω
225 Watts x 2 @ 4Ω Bridged + N/A
Bridgeable
Yes
Front Terminals: Left (+) Right (-)
Rear Terminals: Left (+) Right (-)
Front Terminals: Left (+) Right (-)
Rear Terminals: Left (+) Right (-)
Frequency Response
20Hz - 20kHz
Input Sensitivity
150 mV to 12 V
Circuit Topology Class
Class AD + Class BD (Sub)
Efficiency (average)
>85%
Total Harmonic Distortion (THD+Noise)
4 Ch 4-Ohm: <1.0%
4 Ch 2-Ohm: <1.0%
Sub 4-Ohm <1.0%
Sub 2-Ohm <1.0%
Sub 1-Ohm <1.0%
4 Ch 2-Ohm: <1.0%
Sub 4-Ohm <1.0%
Sub 2-Ohm <1.0%
Sub 1-Ohm <1.0%
Signal Input
Front High/Low Input: 4-Pin harness
Rear High/Low Input: 4-Pin harness
Sub High/Low Input: 4-Pin harness
Input Switch: 2CH/4CH
(2CH: sub signal derived from Front Left input)
Rear High/Low Input: 4-Pin harness
Sub High/Low Input: 4-Pin harness
Input Switch: 2CH/4CH
(2CH: sub signal derived from Front Left input)
Signal Output
—
Tone Controls
Front/Rear Treble: 0 to +14dB @ 12.5kHz (HP mode)
Front/Rear: 0 to +18 dB @ 45Hz (LP mode)
Sub: 0 to +18 dB @ 45 Hz
Front/Rear: 0 to +18 dB @ 45Hz (LP mode)
Sub: 0 to +18 dB @ 45 Hz
Crossover Controls
High-Pass: 50Hz - 250Hz @ 12dB/Octave
Low-Pass: 50Hz - 250Hz @ 12dB/Octave
Subwoofer: 50Hz - 250Hz @ 12dB/Octave
Infrasonic: 28Hz @ 12dB/Octave
Butterworth Alignment on all filters
Low-Pass: 50Hz - 250Hz @ 12dB/Octave
Subwoofer: 50Hz - 250Hz @ 12dB/Octave
Infrasonic: 28Hz @ 12dB/Octave
Butterworth Alignment on all filters
Remote Controls
Optional PLC2 provides Punch Level Control
Visual Indicators
Power: Blue LED
Protect: Red LED
Input Clip: Red LED3
Output Clip: Blue/Violet/Red LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Protect: Red LED
Input Clip: Red LED3
Output Clip: Blue/Violet/Red LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
4 AWG
Power Input Connector
Detachable Compression Terminal
Speaker Wire Gauge
Front/Rear: 16 AWG
Sub: 10 AWG
Sub: 10 AWG
Speaker Output Connector
Front: 4-Pin Harness
Rear: 4-Pin Harness
Sub: Detachable Compression Terminal
Rear: 4-Pin Harness
Sub: Detachable Compression Terminal
Cooling
Dual Fan Cooled
Heatsink
Extruded Aluminum
Operating Voltage
Recommended Fuse
(not included)
(not included)
100 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
108 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.6 x 4.3 x 12 (in.)
4.1 x 10.8 x 30.5 (cm)
4.1 x 10.8 x 30.5 (cm)
Shipping Weight
1x Rockford Fosgate RFK1 Power Only Amp Kit: 17ft 1/0awg Power Wire, 3ft 1/0awg Ground Wire, 20ft Remote Wire, Anl/Maxi Fuse Holder, - 300 Amp Fuse (RFK1)
Rockford Fosgate 1/0 Power Installation Kit
1/0 gauge power and ground installation kit for an amplifier.
Kit includes 17 feet of 1/0 AWG power wire, 3 feet of ground wire, ANL/Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 1/0 AWG (53.5mm²) 4,704 strands
- 1 Year WarrantyFULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 1/0 AWG (53.5mm²) 4,704 strands
- 1 Year Warranty
Specifications
Battery PWR/GND Gauge
1/0 AWG
Amplifier PWR/GND Gauge
1/0 AWG
Fuse Size
300 Amp
Dual Amp Installation Kit
No
Speaker Wire Gauge
N/A
Fuse Type
ANL