Description
Included in this kit
This bundle includes a Rockford Fosgate P3D4-12 12” Subwoofer- DVC (dual 4-Ohm), 600 Watts Rms, 1200 Watts Peak, a Rockford Fosgate P1000X1BD Mono Amplifier - 300x1 @ 4-Ohm, 600x1 @ 2-Ohm, 1000x1 @ 1-Ohm, a Rockford Fosgate PLC2 Remote Punch Level Control- Works With Current Punch Amps, and a Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse.
1x Rockford Fosgate P3D4-12 12” Subwoofer- DVC (dual 4-Ohm), 600 Watts Rms, 1200 Watts Peak (P3D4-12)
Rockford Fosgate Punch 12" P3 4-Ohm DVC Subwoofer
The P3D4-12 is the best performing Rockford Fosgate Punch series subwoofer for cars and trucks. The P3 12” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
The P3D4-12 12-inch subwoofer is Rockford Fosgate's best performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
- Custom 10-AWG nickel plated push terminals
- Dual linear spider with embedded 16 AWG tinsel leads
- Extended pole piece and bumped vented backplate
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Anodized aluminum cone and dustcap
- Protective PVC textured magnet cover
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
- 1 Year Warranty
Specifications
1200 Watts Max
1x Rockford Fosgate P1000X1BD Mono Amplifier - 300x1 @ 4-Ohm, 600x1 @ 2-Ohm, 1000x1 @ 1-Ohm (P1000X1BD)
Rockford Fosgate Punch 1,000 Watt Class-bd Mono Amplifier
With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 1 Year Warranty
General Specifications
CEA-2006 Power Rating300W x 1 @ 4Ω
≤1.0% THD+N
(Sum of Rated Power)
(RMS Continuous Power)
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
(PVC/PowerCube®)
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
2-Ohm: <1.0%
1-Ohm: <1.0%
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
(not included)
6.05 x 19.71 x 33.73 (cm)
1x Rockford Fosgate PLC2 Remote Punch Level Control- Works With Current Punch Amps (PLC2)
Remote Level Control offers remote level control of the amplifier. Once the on-board gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers
Features:
Remote wired level control Works in conjunction with on-board gain control Dual function LED (power/clipping) Controls level when crossover set to LP (Low-Pass) Controls level on rear outputs of 4-channel amplifiers Conveniently mount under dash, inside center console or glovebox Includes bass knob, cable, mounting clip, mounting screws 1 Year Warranty
Specifications:
Mounting: Under Dash, Panel Mount
Connector Type: RJ45, (8-conductor non-flipped)
Cable Length: 16.5-feet (503 cm)
1x Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse (RFK4X)
Rockford Fosgate 4 AWG Complete Installation Kit
4 gauge complete power, ground and signal installation kit for a 2-channel amplifier.
Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, 30 feet of 16 AWG speaker wire, (1) 16 feet twisted pair RCA, Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 4 AWG (21.1mm²) 1,862 strands
- 16 AWG (1.31mm²) 65 strands
- 1 Year Warranty
Specifications