Description
Included in this kit
This bundle includes a Rockford Fosgate PLC2 Remote Punch Level Control- Works With Current Punch Amps, a Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse, a Rockford Fosgate P3SD4-12 12” Slim Subwoofer, DVC, 400W Rms, and a Rockford Fosgate P500X1BD Mono Amplifier - 150x1 @ 4-Ohm, 300x1 @ 2-Ohm, 500x1 @ 1-Ohm.
1x Rockford Fosgate PLC2 Remote Punch Level Control- Works With Current Punch Amps (PLC2)
Remote Level Control offers remote level control of the amplifier. Once the on-board gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers
Features:
Remote wired level control Works in conjunction with on-board gain control Dual function LED (power/clipping) Controls level when crossover set to LP (Low-Pass) Controls level on rear outputs of 4-channel amplifiers Conveniently mount under dash, inside center console or glovebox Includes bass knob, cable, mounting clip, mounting screws 1 Year Warranty
Specifications:
Mounting: Under Dash, Panel Mount
Connector Type: RJ45, (8-conductor non-flipped)
Cable Length: 16.5-feet (503 cm)
1x Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse (RFK4X)
Rockford Fosgate 4 AWG Complete Installation Kit
4 gauge complete power, ground and signal installation kit for a 2-channel amplifier.
Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, 30 feet of 16 AWG speaker wire, (1) 16 feet twisted pair RCA, Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 4 AWG (21.1mm²) 1,862 strands
- 16 AWG (1.31mm²) 65 strands
- 1 Year Warranty
Specifications
Battery PWR/GND Gauge
4 AWG
Amplifier PWR/GND Gauge
4 AWG
Fuse Type
MAXI
Dual Amp Installation Kit
No
Speaker Wire Gauge
16 AWG
Fuse Size
100 Amp
1x Rockford Fosgate P3SD4-12 12” Slim Subwoofer, DVC, 400W Rms (P3SD4-12)
Rockford Fosgate Punch 12" P3S Shallow 4-Ohm DVC Subwoofer
Rockford Fosgate P3S 12" shallow mount subwoofer delivers “Punch” even when depth is limited. The P3SD4-12 features Dual 4-Ohm voice coils for wiring flexibility and 400 Watts RMS power handling.
The Rockford Fosgate P3S 12" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, because some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. Shallow woofers are specifically designed for spaces where a traditional woofer cannot be used.
- M-Roll Santoprene™ surround
- StampCast basket with integrated spider venting
- Anodized aluminum cone and dustcap
- Dual linear spider with embedded 16 AWG tinsel leads
- Diamond cut cast aluminum trim ring with optional grille
- Shallow Motor Assembly
- Optimized for both sealed and vented enclosures
- 1 Year Warranty
Specifications
Nominal Impedance
Dual 4-Ohm
Magnet Weight (oz)
51 oz. (1.45 kg.)
Voice Coil Diameter
2.5" (65.5 mm)
Speaker Connector
Dual 10 AWG Compression
Mounting Depth
3.65 in. (92.5 mm)
Qms
5.70
Vas (Liters)
35.3
Re (Ohms)
6.80
Size
12"
Shipping Weight
13.25 Lbs. (6.01 kg.)
Fs (Hz)
35.4
Qts
0.72
Qes
0.83
Cutout Diameter
11.22 in. (285.0 mm)
Woofer Displacement
0.086 cu. ft. (2.45 Liters)
CEA-2031 Compliant
Power Handling (Watts RMS)
400 Watts RMS
800 Watts Max
800 Watts Max
Le (mH)
4.4
Sd (cm2)
500
SPL (dB @ 1w/1m)
85
Xmax (mm)
8.1
Subwoofer Type
Shallow
Voice Coil Type
Dual Voice Coil
Sealed Box Volume (Vb)
1.0 cu. ft. (28.3 Liters)
Vented Box Volume (Vb)
1.25 cu. ft. (35.3 Liters)
1x Rockford Fosgate P500X1BD Mono Amplifier - 150x1 @ 4-Ohm, 300x1 @ 2-Ohm, 500x1 @ 1-Ohm (P500X1BD)
Rockford Fosgate Punch 500 Watt Class-bd Mono Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
With its super efficient Class-bd circuit topology, the P500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 1 Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating150W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
500 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
150 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
500 Watts x 1 @ 1-Ohm
300 Watts x 1 @ 2-Ohm
500 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
224 Watts x 1 @ 4-Ohm
410 Watts x 1 @ 2-Ohm
787 Watts x 1 @ 1-Ohm
410 Watts x 1 @ 2-Ohm
787 Watts x 1 @ 1-Ohm
Bridgeable
No
Frequency Response
20Hz to 250Hz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class BD
Efficiency (average)
86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Low level: 1 RCA pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave
All-Pass (AP): No
Infrasonic Filter (IF): 28Hz @ 12dB/Octave
All-Pass (AP): No
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
80 A
Average Current Draw (13.8V Music)
35 A
Max. Current Draw (13.8V Sinewave)
70 A
Suggested Alternator
75 A
Dimensional Diagram
Dimensions (H x W x D)
2.38 x 7.76 x 11.03 (in)
6.05 x 19.71 x 28.02 (cm)
6.05 x 19.71 x 28.02 (cm)
Shipping Weight
10.8 Lbs. (4.89 Kg.)