Description
Included in this kit
This bundle includes a Rockford Fosgate R2-500X4 4 Channel Amplifier- 75x4 @ 4-Ohm, 125x4 @ 2-Ohm, 250x2 @ 4-Ohm Bridged, a Rockford Fosgate P2V2-65 - 6.5" 2-way convertible with internal/external crossover, 75 watts RMS, 150 watts peak, and a Rockford Fosgate P2V2-69 - 6x9" 2-way convertible with internal/external crossover, 75 watts RMS, 150 watts peak.
1x Rockford Fosgate R2-500X4 4 Channel Amplifier- 75x4 @ 4-Ohm, 125x4 @ 2-Ohm, 250x2 @ 4-Ohm Bridged (R2-500X4)
Rockford Fosgate Prime 500 Watt 4-Channel Amplifier
Primed for Performance, the R2-500X4 is a 500 watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.
The R2 models were developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.
- Balanced Differential Inputs with RCA Pass Through Outputs
- High Level Input Capable
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Features C.L.E.A.N. Set-up
- 2/4 Channel Input Selection Switch
- Front and Rear Variable Input Gain adjustment level
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Cast aluminum heat sink
- Full Range Class-D
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- 1 Year WarrantyBalanced Differential Inputs with RCA Pass Through Outputs
- High Level Input Capable
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Features C.L.E.A.N. Set-up
- 2/4 Channel Input Selection Switch
- Front and Rear Variable Input Gain adjustment level
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Cast aluminum heat sink
- Full Range Class-D
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- 1 Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating75W x 4 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
500 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
75 Watts x 4 @ 4Ω
125 Watts x 4 @ 2Ω
250 Watts x 2 @ 4Ω Bridged/Mono
125 Watts x 4 @ 2Ω
250 Watts x 2 @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
90 Watts x 4 @ 4Ω
160 Watts x 4 @ 2Ω
300 Watts x 2 @ 4Ω Bridged/Mono
160 Watts x 4 @ 2Ω
300 Watts x 2 @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
2Ω: <1.0%
Signal Input
Front Low-Level: 4 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 4 RCA
Rear High-Level: 4-Pin Molex
Input Switch: 2/4 Input
(works for RCA/hi-level inputs)
Front High-Level: 4-Pin Molex
Rear Low-Level: 4 RCA
Rear High-Level: 4-Pin Molex
Input Switch: 2/4 Input
(works for RCA/hi-level inputs)
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
No
Crossover Controls
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
No
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
80 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
59 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm)
(4.9 cm x 17.3 cm x 25.5 cm)
Shipping Weight
1x Rockford Fosgate P2V2-65 - 6.5" 2-way convertible with internal/external crossover, 75 watts RMS, 150 watts peak (P2V2-65)
The P2 PUNCH speakers are flexible upgrades for OEM systems with optional tweeters or for custom upgrades. The P2 convertibles offer true versatility by using them as a coaxial on vehicles equipped with one speaker for a fast drop-in, or a 2-way component on vehicles equipped with a separate tweeter/midrange – like those found in an A-pillar or dash – for enhanced staging and imaging.
Kit Includes:
• (2) 6.5" Speakers
• (2) Crossovers
• (1) Tweete Removal Tool
• Installation Hardware
Speaker Type: Convertible
Midrange Size (Nominal Diameter): 6.5"
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 49 Hz - 25kHz
Voice Coil Diameter (in/mm): 1.25" (32.5 mm)
CrossoverTweeter High-Pass: 9kHz @ 6dB/octave (internal)
Tweeter High-Pass: 9kHz @ 12dB/octave (external)
Tweeter Attenuation: 0dB or -3dB (external)
Power Handling (Watts RMS): 75 Watts RMS / 150 Watts Peak
Fs (Hz): 65 Hz
Sensitivity (dB @ 1W/1M): 88 dB
Sensitivity (2.83V/1M): 91 dB
Cutout Diameter: 5.42" (137.6 mm)
Mounting Depth (Standard Flange): 2.5" (63.5 mm)
Min. Mounting Depth (No Motor Cover): 2.26" (57.3 mm)
Front Side Clearance: 0.43" (11 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box
(2) 3/4" 4Ω Tweeters
(2) 6.5" 4Ω Speakers
(1) 6.5" Speaker Cut-Out Template
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(8) Self-Tapping Phillips #8x32mm (Speaker)
(4) Self-Tapping Phillips #8x20mm (Crossover)
(2) Woofer Phase Plugs
(2) Flush-Mount Tweeter Cups
(2) Surface-Mounting Tweeter Cups
(1) Tweeter Removal Tool
(2) Passive Crossover Network (Tweeter)
(2) 18” Crossover Wiring Extensions
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(4) 18 AWG Crimp Butt Connectors
(6) Zip Ties 4.8 mm x 350 mm
Mounting Hardware: Yes
1x Rockford Fosgate P2V2-69 - 6x9" 2-way convertible with internal/external crossover, 75 watts RMS, 150 watts peak (P2V2-69)
The P2 PUNCH speakers are flexible upgrades for OEM systems with optional tweeters or for custom upgrades. The P2 convertibles offer true versatility by using them as a coaxial on vehicles equipped with one speaker for a fast drop-in, or a 2-way component on vehicles equipped with a separate tweeter/midrange – like those found in an A-pillar or dash – for enhanced staging and imaging.
Kit Includes:
• (2) 6x9" Speakers
• (2) Crossovers
• (1) Tweete Removal Tool
• Installation Hardware
Speaker Type: Convertible
Midrange Size (Nominal Diameter): 6"x9"
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 45Hz - 25kHz
Voice Coil Diameter (in/mm): 1.25" (32.5 mm)
CrossoverTweeter High-Pass: 9kHz @ 6dB/octave (internal)
Tweeter High-Pass: 9kHz @ 12dB/octave (external)
Tweeter Attenuation: 0dB or -3dB (external)
Power Handling (Watts RMS): 75 Watts RMS/150 Watts Peak
Fs (Hz): 60 Hz
Sensitivity (dB @ 1W/1M): 90 dB
Sensitivity (2.83V/1M): 93 dB
Cutout Diameter: 8.41" x 5.71" (213.5 mm x 145 mm)
Mounting Depth (Standard Flange): 3.13" (79.4 mm)
Min. Mounting Depth (No Motor Cover): 2.55" (64.7 mm)
Front Side Clearance: 0.42" (10.6 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box
(2) 3/4" 4Ω Tweeters
(2) 6”x9” 4Ω Speakers
(1) 6”x9” Speaker Cut-Out Template
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(8) Self-Tapping Phillips #8x32mm (Speaker)
(4) Self-Tapping Phillips #8x20mm (Crossover)
(2) Woofer Phase Plugs
(2) Flush-Mount Tweeter Cups
(2) Surface-Mounting Tweeter Cups
(1) Tweeter Removal Tool
(2) Passive Crossover Network (Tweeter)
(2) 18” Crossover Wiring Extensions
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(4) 18 AWG Crimp Butt Connectors
(6) Zip Ties 4.8 mm x 350 mm
Mounting Hardware: Yes