Description
Included in this kit
This bundle includes a Rockford Fosgate R2-750X1 Mono Amplifier- 250x1 @ 4-Ohm, 500x1 @ 2-Ohm, 750x1 @ 1-Ohm, and 2x Rockford Fosgate P2D4-15 15” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak.
1x Rockford Fosgate R2-750X1 Mono Amplifier- 250x1 @ 4-Ohm, 500x1 @ 2-Ohm, 750x1 @ 1-Ohm (R2-750X1)
Rockford Fosgate Prime 750 Watt Mono Amplifier
Primed for Performance, the R2-750X1 amplifier is a 750 watt, Class-D, capable of operating at 4Ω, 2Ω or 1Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
The Prime Series were developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.
- Balanced Differential Inputs with RCA Pass Through Outputs
- High Level Input Capable
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Features C.L.E.A.N. Set-up
- Variable Input Gain adjustment level
- Includes RLC Remote Level Control
- Variable Infrasonic Filter
- Continuously Variable On Board Punch EQ
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Cast aluminum heat sink
- Class-D Topology
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- 1 Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating250W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
750 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
250 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω
750 Watts x 1 @ 1Ω
500 Watts x 1 @ 2Ω
750 Watts x 1 @ 1Ω
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
300 Watts x 1 @ 4Ω
545 Watts x 1 @ 2Ω
830 Watts x 1 @ 1Ω
545 Watts x 1 @ 2Ω
830 Watts x 1 @ 1Ω
Bridgeable
No
Frequency Response
20 Hz - 250 Hz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
Remote Controls
Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out
C.L.E.A.N. In
C.L.E.A.N. Out
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
120 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
71 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm)
(4.9 cm x 17.3 cm x 25.5 cm)
Shipping Weight
2x Rockford Fosgate P2D4-15 15” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak (P2D4-15)
Rockford Fosgate Punch 15" P2 4-Ohm DVC Subwoofer
The Rockford Fosgate P2 15” subwoofer continues “The PUNCH” tradition. The P2D4-15 features a Dual 4-Ohm voice coil, 400 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.
Rockford Fosgate has always been known as "The PUNCH" and the P2 15" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.
- Dual linear spider with embedded 16 AWG tinsel leads
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Protective PVC textured magnet cover
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Diamond cut cast aluminum trim ring with optional grille
- 1 Year Warranty
Specifications
Size
15"
Power Handling (Watts RMS)
400 Watts RMS
800 Watts Max
800 Watts Max
Speaker Connector
Dual 10 AWG compression
Shipping Weight
17.9 Lbs. (8.11 kg)
SPL (dB @ 1w/1m)
86
Cutout Diameter
13.9 in. (353 mm)
Re (Ohms)
6.40
Le (mH)
5.4
Nominal Impedance
Dual 4-Ohm
Magnet Weight (oz)
81 oz. (2.30 kg.)
Voice Coil Diameter
2.25" (57.15 mm)
Mounting Depth
7.34 in. (186.5 mm)
Fs (Hz)
20.9
Qts
0.66
Qes
0.74
Qms
5.70
Vas (Liters)
219.6
Woofer Displacement
0.134 cu. ft. (3.8 Liters)
CEA-2031 Compliant
Xmax (mm)
12.2
Sd (cm2)
894
Subwoofer Type
Standard
Voice Coil Type
Dual Voice Coil
Sealed Box Volume (Vb)
1.58 cu. ft. (44.7 Liters)
Vented Box Volume (Vb)
2.66 cu. ft. (75.3 Liters)