Description
Included in this kit
This bundle includes a Rockford Fosgate P300X1 Mono Amplifier - 200x1 @ 4-Ohm, 300x1 @ 2-Ohm, and a Rockford Fosgate P3SD4-10 10" Slim Subwoofer - Dual 4-Ohm, 300W RMS, 600W Peak.
1x Rockford Fosgate P300X1 Mono Amplifier - 200x1 @ 4-Ohm, 300x1 @ 2-Ohm (P300X1)
Rockford Fosgate Punch 300 Watt Full-Range Mono Amplifier
The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- 1 Year Warranty
General Specifications
CEA-2006 Compliant
CEA-2006 Power Rating200W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
300 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
300 Watts x 1 @ 2-Ohm
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
260 Watts x 1 @ 4-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res
Bridgeable
No
Frequency Response
20Hz to 20kHz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class A/B
Efficiency (average)
74% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Crossover Controls
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
8 AWG to 4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
50 A
Average Current Draw (13.8V Music)
23 A
Max. Current Draw (13.8V Sinewave)
45 A
Suggested Alternator
75 A
Dimensional Diagram
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
6.05 x 19.71 x 25.04 (cm)
Shipping Weight
9.5 Lbs. (4.30 Kg.)
1x Rockford Fosgate P3SD4-10 10" Slim Subwoofer - Dual 4-Ohm, 300W RMS, 600W Peak (P3SD4-10)
Rockford Fosgate Punch 10" P3S Shallow 4-Ohm DVC Subwoofer
Rockford Fosgate P3S 10" shallow mount subwoofer delivers “Punch” even when depth is limited. The P3SD4-10 features Dual 4-Ohm voice coils for wiring flexibility and 300 Watts RMS power handling.
The Rockford Fosgate P3S 10" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, because some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. Shallow woofers are specifically designed for spaces where a traditional woofer cannot be used.
- M-Roll Santoprene™ surround
- StampCast basket with integrated spider venting
- Anodized aluminum cone and dustcap
- Dual linear spider with embedded 16 AWG tinsel leads
- Diamond cut cast aluminum trim ring with optional grille
- Shallow Motor Assembly
- Optimized for both sealed and vented enclosures
- 1 Year Warranty
Specifications
Magnet Weight (kg) NOT USED
1.32 oz. (47 kg.)
Nominal Impedance
Dual 4-Ohm
Magnet Weight (oz)
47 oz. (1.32 Kg)
Voice Coil Diameter
2.5" (65.5 mm)
SPL (dB @ 1w/1m)
83
Fs (Hz)
42
Qms
6.00
Vas (Liters)
14.3
Cutout Diameter
9.06 in. (230.0 mm)
Woofer Displacement
0.074 cu. ft. (2.1 Liters)
Sd (cm2)
333
Size
10"
Speaker Connector
Dual 10 AWG Compression
Mounting Depth
3.50 in. (89.0 mm)
Shipping Weight
11.9 Lbs. (5.39 kg.)
Qts
0.78
Qes
0.90
Xmax (mm)
8.1
CEA-2031 Compliant
Power Handling (Watts RMS)
300 Watts RMS
600 Watts Max
600 Watts Max
Re (Ohms)
6.80
Le (mH)
4.3
Subwoofer Type
Shallow
Voice Coil Type
Dual Voice Coil
Sealed Box Volume (Vb)
0.5 cu. ft. (14.1 Liters)
Vented Box Volume (Vb)
1.0 cu. ft. (28.3 Liters)