USS4 - UNIVERSAL SPEAKERS SIMULATOR 4CH
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power* the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition.
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power* the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition.
Manufacturer SKU: |
66755090 |
UPC: |
8018823124256 |
Bundle: |
No |
Feature 1: |
Input/Output Channels: 4 |
Feature 2: |
Input Power Max: 50W |
Feature 3: |
Input Impedance: 12 Ohms |
Feature 4: |
Output Impedance: 12 Ohms |
Feature 5: |
Remote Out: 12 VDC 150 mA |
Condition: |
NEW |
Weight: |
0.3200 lbs |
ASIN: |
B077RZJBJV |
