Description
Included in this kit
This bundle includes 2x Wavtech TP12G Grille Compatible with thinPRO12 Shallow Subwoofers, a Wavtech Link1500.1plus 1500 Watt Mono Amplifier, and 2x Wavtech thinPRO12-2 750 Watt 12" Shallow Subwoofer 2 ohm.
2x Wavtech TP12G Grille Compatible with thinPRO12 Shallow Subwoofers - (TP12G)
12" Grille compatible with WavTech thinPro12 Shallow Subwoofers
1x Wavtech Link1500.1plus 1500 Watt Mono Amplifier - (Link1500.1plus)
The link1500.1plus is the result of extensive engineering and development. The goal was an amplifier with the same power output at either 2 or 1 ohm. This amp makes 1500 watts RMS @ 2 or 1 ohm. This is achieved with our new dual rail voltage power supply. When setting up the amp, simply select the impedance of your subwoofer with the 4/2 or 1 ohm switch and the amp does the rest. At 13.11”x6.5”x1.65”, it is incredible small for a 1500 watt RMS amp.
The link1500.1plus features our bassFREQ preamp, with a 24dB per octave crossover, an adjustable parametric EQ and a 24dB per octave subsonic filter. Like all Wāvtech amplifiers, the speaker level inputs of the link1500.1plus can handle up to 40V and have our adaptive loading technology. The optional linkRC remote allows for control of the subwoofer system from the vehicles front seat. The link1500.1plus is also compatible with OEM start/stop systems.
link1500.1plus Features
1500 Watt Mono Amplifier
900 watts x 1 @ 4 ohms
1500 watts x 1 @ 2 ohms
1500 watts x 1 @ 1 ohm
Only 13.11”x6.5”x1.65”
Dual Rail Voltage Power Supply
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
bassFREQ Bass Processor w/Parametic EQ
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Locking Detachable Hi-Level Speaker Terminals
0 Gauge Power/Ground Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
link1500.1plus Specifications
Input Sensitivity: SPK: 1-20Vrms, 2-40Vrms, RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >77dBA (1W, 4Ω)
2x Wavtech thinPRO12-2 750 Watt 12" Shallow Subwoofer 2 ohm - (thinPRO12-2)
The thinPRO12 has a mounting depth of just 3 inches, so it is really thin, but it does not perform like a shallow subwoofer. Our Patent Pending design allows for some big performance advantages. The dual mirrored NBR spiders and axial force transfer assembly achieve over 2-inches of peak to peak excursion.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex and glass fiber, making it incredibly rigid and very lightweight. The 5 inch voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
thinPRO12 Features
750 Watts RMS Power Handling
3 inch Mounting Depth
5 inch Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP12G Sold Separately)
Honeycomb Nomex and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 11 1/8in (282mm) Standard 12 inch cutout
Specifications:
General
Nominal Size: 12"
Nominal Impedence: 2 Ohm
Power Handling: 750W RMS/ 2250W Peak
Recommended Power Range: 250W-750W
Frequency Response: Fs - 300Hz
Voice Coil Diameter: 127mm (5")
Electro-Mechanical Parameters
Fs: 25Hz
Re: 1.85 Ohms
Le: 2.48mH
QMS: 5.02
Qes: 0.55
Qts: 0.49
SPL/Sensitivity (1W/1m): 83dB
Xmax: 20mm (0.79")
Xmechp-p: 54mm (2.13")