Description
Included in this kit
This bundle includes a Wavtech link4+ 4-Channel Line Output Converter with autoBASS, Matrix Summing and Remote, and a Wavtech LINK400.4MINI 400W RMS Compact 4-Channel Bridgeable Amplifier.
1x Wavtech link4+ 4-Channel Line Output Converter with autoBASS, Matrix Summing and Remote (LINK4+)
Factory Audio Integration
Wāvtech link4+ Four-Channel LOC with autoBASS and Remote
Connect aftermarket amplifiers to a factory source with four-channel conversion, matrix summing and flexible level control.
Routing and bass correction
Direct, copy and summing options accommodate two-channel or four-channel sources. Independent gain and level trim help balance signals before they reach an aftermarket amplifier. autoBASS can activate the CH3/4 parametric EQ near the source volume where factory bass roll-off occurs. Boost and center-frequency adjustments tune that correction for the system.
- Four-channel line output converter with direct, copy and matrix-summing modes for factory-system integration.
- autoBASS activates the CH3/4 parametric EQ to compensate for factory bass roll-off, with up to 12 dB boost at 30–80 Hz.
- Included multi-function remote provides source selection, master volume, subwoofer level and configurable fade/zone control.
- Four selectable main-input ranges accommodate low-level and speaker-level sources, with an additional 3.5 mm AUX input.
- Start-stop compatibility, adaptive OEM loading and DC-offset/audio-detect turn-on support factory-audio upgrades.
Included remote and source control
The multi-function remote supports main and AUX source control, master volume, CH3/4 subwoofer level and configurable fade/zone operation. A 16.4-foot/5-meter cable connects it to the unit. Adaptive OEM loading and automatic DC-offset or audio-signal detection support installation with factory sources.
Technical specifications
| Channels | 4 inputs / 4 RCA outputs |
| Routing | Direct, copy or matrix sum; ±6 dB level trim |
| Main input sensitivity | 0.5–5 V, 1–10 V, 2–20 V or 4–40 V selectable ranges |
| AUX input | 3.5 mm; 0.5–5 Vrms |
| Maximum main input | 40 V with loading on; peak under 5 seconds |
| Maximum output | Greater than 10 V at 1% THD+N |
| Output impedance | Less than 50 ohms |
| Frequency response | Below 10 Hz to above 100 kHz; max-flat +0/−1 dB |
| THD+N | Below 0.04% main/AUX, 20 Hz–20 kHz |
| S/N at10 V output, CH1/2 | −114 dBA main /−117 dBA AUX |
| S/N at10 V output, CH3/4 | −112 dBA main /−114 dBA AUX |
| Parametric EQ | 0 to+12 dB boost; 30–80 Hz center frequency |
| Generated remote output | Greater than 500mA |
| Power | 12 V negative ground; 7.2–16.5 V operating range after startup |
| Main chassis H×W×L | 1.1×3.5×5.2 in; excludes tabs, terminals and jacks |
| Remote housing H×W×L | 1.1×1.5×1.8 in; excludes tabs and knobs |
| Included | Main unit, pre-attached mounting tabs, PWR/SPK terminals, multi-function remote and 16.4 ft/5 m cable |
1x Wavtech LINK400.4MINI 400W RMS Compact 4-Channel Bridgeable Amplifier (LINK400.4MINI)
Wavtech LINK400.4MINI 400W RMS Compact 4-Channel Bridgeable Amplifier
A compact bridgeable amplifier with matrix summing, channel 3/4 bass tuning and factory-system integration.
Build a factory or aftermarket audio upgrade with the link400.4mini. This four-channel bridgeable amplifier combines matrix summing, adaptive OEM loading and speaker-level inputs up to 40Vrms. Channels 3/4 add a parametric EQ, subsonic filter and support for the optional linkRC remote level control. Start/stop compatibility and active thermal rollback support vehicle integration.
Power for flexible system layouts
The link400.4mini delivers 65 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms. Its 4/3/2-channel bridgeable design supports 200 watts RMS x 2 at 4 ohms in bridged operation, with ratings specified at 14.4V and less than 1% THD+N.
Combine and balance factory signals
The four-channel matrix summing processor allows direct, copied or summed channel-pair routing. Adaptive speaker-input loading supports OEM load-detect systems, while +/-6dB output level trim balances channel pairs after summing or copying. Differential balanced inputs accept speaker-level or RCA sources.
Channel 3/4 bass adjustment
The parametric EQ provides 0 to +12dB boost, adjustable Q from 1.4 to 5, and a 30–80Hz center frequency. A 10–50Hz subsonic filter operates at up to -24dB/octave. The optional linkRC adjusts channel 3/4 output from 0 to -30dB.
Two crossover ranges
Variable -12dB/octave high-pass and low-pass filters cover 50–500Hz in the x1 range or 500Hz–5kHz in the x10 range. Gain controls with clip LEDs help set source sensitivity without relying on guesswork.
Vehicle integration and installation
Automatic turn-on can detect DC offset or audio, with a wired remote trigger also supported. Start/stop compatibility and active thermal rollback are built in. The amplifier uses 4AWG power/ground terminals, 10AWG speaker outputs and detachable mounting tabs.
Technical specifications
| Model | link400.4mini |
| Configuration | 4/3/2-channel bridgeable |
| RMS power at 4 ohms | 65W x 4 |
| RMS power at 2 ohms | 100W x 4 |
| Bridged RMS power at 4 ohms | 200W x 2 |
| Power-rating conditions | 14.4V; less than 1% THD+N |
| Frequency response, extended | Below 10Hz to above 40kHz (+0/-3dB) |
| Frequency response, max flat | Below 10Hz to above 28kHz (+0/-1dB) |
| Speaker input sensitivity | 1–20Vrms / 2–40Vrms |
| RCA input sensitivity | 0.2–5Vrms / 0.4–10Vrms |
| HP/LP crossover | 50–500Hz or 500Hz–5kHz; -12dB/octave |
| Output level trim | +/-6dB |
| CH3/4 parametric EQ | 0 to +12dB boost; Q 1.4–5; 30–80Hz center frequency |
| CH3/4 subsonic filter | 10–50Hz; up to -24dB/octave |
| Optional remote level control | linkRC; channels 3/4; 0 to -30dB |
| External fuse / minimum power wire | 50A fuse; 8AWG wire; fuse not included |
| Power / ground terminals | 4AWG |
| Speaker output terminals | 10AWG |
| Operating range after startup | 7–16V; startup above 10.3V |
| Chassis dimensions (H x W x L) | 1.65 x 4.53 x 7.2 inches; excludes terminals/tabs |
| Overall dimensions (H x W x L) | 1.73 x 4.53 x 8.23 inches; includes terminals/tabs |
| Included items | Amplifier, speaker-level input terminals, pre-attached mounting tabs, hex wrenches, mounting screws |
Requires an external 50A fuse (not included) and minimum 8AWG power wiring. Install in a dry, ventilated location.