Description
Included in this kit
This bundle includes 2x Wet Sounds SCT-6-TI-RGB SCOUT 6 6.5-Inch Dark Titanium Marine Coaxial Speakers with RGB, and a Wet Sounds RF RGB Music Controller w/Touch Activated Remote.
2x Wet Sounds SCT-6-TI-RGB SCOUT 6 6.5-Inch Dark Titanium Marine Coaxial Speakers with RGB (SCT-6-TI-RGB)
Wet Sounds SCOUT Series • Dark Titanium Marine Coaxial Speaker Pair
SCT-6-TI-RGB SCOUT 6 6.5-Inch Dark Titanium Marine Coaxial Speakers with RGB
The SCOUT 6 is an efficient marine coaxial speaker pair built for clear full-range sound, straightforward integration, and outdoor durability.
6.5-inch coaxial pair30W RMS per speaker4-ohm impedanceIP65 ratedDark TitaniumIntegrated RGB lighting
Efficient Full-Range Sound
Designed for Practical Marine Audio Upgrades
With 87 dB sensitivity, 4-ohm impedance, and 30 watts RMS power handling per speaker, the SCOUT 6 is designed for use with a factory head unit or modest marine amplifier. A 1-inch PEI dome tweeter complements the 6.5-inch driver across a stated 50 Hz to 20 kHz range.
Marine Construction
Built for Outdoor Environments
The IP65-rated design helps protect against dust, UV exposure, saltwater spray, vibration, and water jets. The driver uses an injection-molded polypropylene cone, Santoprene rubber surround, and Conex spider.
Integrated RGB Lighting
Built-in RGB LEDs support customizable illumination when paired with a compatible RGB controller.
Standard 6.5-Inch Format
Round 6.5-inch sizing supports integration into compatible marine and powersports speaker locations.
Sold as a Pair
The package includes two matching dark titanium coaxial speakers for stereo installation.
Technical Specifications
| Model | SCOUT 6 RGB |
| Output SKU | SCT-6-TI-RGB |
| Manufacturer SKU | SCT 6-Ti RGB |
| Finish | Dark Titanium |
| Speaker Size | 6.5 inches |
| Configuration | Coaxial speaker pair |
| RMS Power | 30W per speaker |
| Peak Power | 60W per speaker |
| Impedance | 4 ohms |
| Frequency Response | 50 Hz–20 kHz |
| Sensitivity | 87 dB |
| Tweeter | 1-inch PEI dome |
| Cone | Injection-molded polypropylene |
| Surround | Santoprene rubber |
| Spider | Conex |
| Environmental Rating | IP65 |
| RGB Lighting | Yes |
| UPC | 810188610997 |
Included: Two matching dark titanium SCOUT 6 coaxial speakers.
1x Wet Sounds RF RGB Music Controller w/Touch Activated Remote (RF-RGB-MCV2)
Take control of your Wet Sounds LED speakers with the RF RGB Music Controller w/ Touch Activated Remote. With the Wet Sounds RF-RGB-MC V2 you can run up to 10 meters (38ft.) of led strips without a doubt. This handy remote controls your LED speakers using the most advanced PWM (pulse width modulation) remote control technology. You can choose your favorite accent color, or explore five multi-light color change modes or three music modes — you can set the mood or set the lights to react to the beat of the music. All in all, you'll find thousands of different color combinations available.
Features -
• Power: on
• Power: off
• Color Wheel: choose color with touch sensitive color wheel
• Brightness: rocker switch
• Speed: rocker switch; change the speed at which the colors change in multi-color mode
Multi-Color: rocker switch; change between the six color modes -
• Mode 1: static mode (not blinking); choose one of the seven colors (white, cyan, purple, yellow, blue, green, or red)
• Mode 2: blinks (sharply) between all seven colors
• Mode 3: fades gradually between red, green, and blue
• Mode 4: fades gradually between all seven colors
• Mode 5: single color blink; choose one of the seven colors
• Mode 6: two color blink; choose blue and green, blue and red, or red and green
Music: rocker switch; change between the five music control modes; each varies with the beat of the music connected to the line input
• Mode 1: choose any one of the seven colors to blink (sharply) with the music (white, cyan, purple, yellow, blue, green, or red)
• Mode 2: quickly fades between all seven colors
• Mode 3: gradual fading between all seven colors
• Mode 4: red hopping, green hopping, or blue hopping
• Mode 5: two color mix; choose blue and green, blue and red, or red and green
Sensitivity: rotary knob on receiver unit; adjusts sensitivity to the music input
Connections (receiver):
Power/Ground: the removable set screw terminal accepts power and ground wires up to 14-gauge
RGB Output: there are two removable RGB output set screw terminals; each accepts bare wire up to 14-gauge
Line Input: the 3.5mm stereo mini-jack input allows integrating the lights with the beat of the music