Description
Kenwood's Excelon X802-5 five-channel amplifier delivers 50 watts RMS to each of your front and rear speakers, while sending up to 500 watts RMS to a sub, yet it'll still fit almost anywhere in your vehicle. You can also use this amp in 3-channel mode to power a pair of high-performance speakers with 150 watts RMS each, and a sub with 500 watts.
Features -
• Max Power 1600W
• Size (inch) (W) 9-3/4" x (H) 2-1/16" x (D) 6-5/8"
• Variable High & Low Pass Filter
• Bass Boost
• Optional Wired Remote Ready
• RMS POWER OUTPUT (4Ω) 50W x 4 + 300W
• RMS POWER OUTPUT (2Ω) 75W x 4 + 500W
• RMS POWER OUTPUT Bridged 150W x 2 (Bridged) + 300W
• Signal Sensing Turn-On
• Speaker Level Input
Specifications -
• Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response 20Hz-50kHz (+0dB, -3dB) A/B
• Frequency Response 20Hz-200Hz (+0dB, -3dB) SUB
• Input Impedance 10k ohm
• Speaker Impedance 4Ω (2Ω to 8Ω allowable)
• Bridged Connection 4Ω to 8Ω allowable
• RCA Input Sensitivity 0.2[V] - 5.0 [V]
• Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]
Terminals -
• Battery & Ground M6 Screw Type Terminal Block
• Speaker Output M4 Screw Type Terminal Block
Features -
• Max Power 1600W
• Size (inch) (W) 9-3/4" x (H) 2-1/16" x (D) 6-5/8"
• Variable High & Low Pass Filter
• Bass Boost
• Optional Wired Remote Ready
• RMS POWER OUTPUT (4Ω) 50W x 4 + 300W
• RMS POWER OUTPUT (2Ω) 75W x 4 + 500W
• RMS POWER OUTPUT Bridged 150W x 2 (Bridged) + 300W
• Signal Sensing Turn-On
• Speaker Level Input
Specifications -
• Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response 20Hz-50kHz (+0dB, -3dB) A/B
• Frequency Response 20Hz-200Hz (+0dB, -3dB) SUB
• Input Impedance 10k ohm
• Speaker Impedance 4Ω (2Ω to 8Ω allowable)
• Bridged Connection 4Ω to 8Ω allowable
• RCA Input Sensitivity 0.2[V] - 5.0 [V]
• Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]
Terminals -
• Battery & Ground M6 Screw Type Terminal Block
• Speaker Output M4 Screw Type Terminal Block
Refurbished FAQ
Refurbished Frequently Asked Questions
- What does refurbished mean? Refurbished products may be unused customer returns that are essentially "new" items, or they may be defective products that were returned under warranty, and resold by the manufacturer after repairing the defects and ensuring proper function.
- What is the warranty? All of our manufacturer refurbished items come with a 90-day warranty. Compared to the new products we carry generally having a 1-year or longer warranty. (JL Audio Amps are 2-years, and all of Wet Sounds carries a 2-year warranty when new)
- What's it look like? A lot of the manufacturer refurbished products we sell generally look very good, and sometimes you can't even tell. However, these products can have some wear and tare on them, and we generally rate them an 8/10 cosmetically, and perfect 10/10 functionally.
- What was wrong with it? We aren't told what is wrong with each and every product. Like stated above, they could have just been a return or they may have had an issue. Regardless, they are all combed over by their respective manufacturer to function as new before being shipped to us.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.