Kenwood's Excelon Reference Series XR401-4 4-channel amplifier will add clarity and punch to your sound, as it powers each of your front and rear speakers with 75 watts RMS. If you're adding bass first, you can use the amp in 2-channel mode to drive a couple of subwoofers with up to 200 watts RMS each. Then later you can switch the amp over to your main speakers when you get a sub amp. The XR401-4 can fit in many different places in your car because of its incredibly low profile — it's under 1-1/2" tall.
Features -
• Deep Bass Sound
• Enhanced Signal to Noise Ratio
• Specialized Circuit Design
• Wired Remote Control
Rated Power Output -
• 14.4 V
• 75 W x 4: (4Ω) (20 Hz - 20 kHz, 1.0% THD)
• 100 W x 4: (2Ω) (1 kHz, 1.0% THD)
• 200 W x 2: Bridged (4Ω) (1 kHz, 1.0% THD)
High Pass Filter Frequency -
• (-12 dB/oct.)
• 50 Hz - 200 Hz (variable) Low-Range
• 2.5 kHz - 10 kHz (variable) High-Range
Low Pass Filter Frequency -
• (-12 dB/oct.)
• 50 Hz - 200 Hz (variable) Low-Range
Features -
• Deep Bass Sound
• Enhanced Signal to Noise Ratio
• Specialized Circuit Design
• Wired Remote Control
Rated Power Output -
• 14.4 V
• 75 W x 4: (4Ω) (20 Hz - 20 kHz, 1.0% THD)
• 100 W x 4: (2Ω) (1 kHz, 1.0% THD)
• 200 W x 2: Bridged (4Ω) (1 kHz, 1.0% THD)
High Pass Filter Frequency -
• (-12 dB/oct.)
• 50 Hz - 200 Hz (variable) Low-Range
• 2.5 kHz - 10 kHz (variable) High-Range
Low Pass Filter Frequency -
• (-12 dB/oct.)
• 50 Hz - 200 Hz (variable) Low-Range
- SKU:
- XR401-4
- UPC:
- 019048223296
- Condition:
- New
- Availability:
- In stock and ready to ship!
- Shipping:
- Free 2-Day Shipping!
UPC: |
019048223296 |
Bundle: |
No |
Feature 1: |
The amplifier design is Class D, which uses digital switching power supplies. The result is much higher efficiency (less heat generated) than Class AB. |
Feature 2: |
The XR401-4 is compatible with Hi-Res Audio sources which are capable of reproducing frequencies up to 40kHz. |
Feature 3: |
The XR401-4 is made up of two full range stereo amps (labeled A and B, typically used to power front and rear speakers). |
Feature 4: |
The front and rear amplifier sections have independent crossover controls with selectable frequency ranges. |
Feature 5: |
With the customizable crossovers, the XR401-4 allows you to bi-amplify a component speaker system. |
Condition: |
NEW |
Weight: |
4.4000 lbs |
ASIN: |
B07B47KJG9 |
